NX10.0.3新版本修复的问题列表

admin

Fixed Problem ReportsNX 10.0.3
PR       
, r% ^( t" g- ?- s8 RDescription
' d& o) x0 A: w" V: Z0 u  S6273244
! m& H' ]3 @8 W9 ~A part which has Linked Composite Curve created before   NX 7.5.1, and  has source parts completely unloaded, may show curves in wrong position  after Part Import
6987529
This issue was when two concentric circle or arcs  were used as input to create the 2D centerline, we created an approximate  arc in between, and hence the dimension values were slightly off
7276407
1. 7404509
* p" J5 q: E, z5 U& sSelection issue for link type filter - There is logic  in bui_layer.c  selection_cb()  that always adds a new cog marker to the selection list if the selection  list contains a link object. To avoid this, check that the cog marker  is not already in the selection list before adding it.
2.  7276407
Hide Pattern Feature does not work if datum csys  is patterned - There is a call to FREC_is_global_selectable()  in IsRmFeatureSupported()  for pattern features that caused this regression. Removed the call to   FREC_is_global_selectable().
7340173
Leader location of the labels having no text changes  on view update
: x8 ?. f2 R' Z8 l. u, [& G7392623
  B8 r2 F! I( g  rLeader location of the labels having no text changes  on view update
  W0 f9 B* E" J* J- [2 L7397240
The problem where the datasetname  for PDF export  can be changed if it contains a colon or slash is fixed
7403885
A number of autotests  are failing due to the OM  check world failure of PART_placeholder  object created for stubs resolution
# Y# q6 R# W- n' Z- g2 i7404509
5 V' g0 f" o7 p, ?1. 7404509
Selection issue for link type filter - There is logic  in bui_layer.c  selection_cb()  that always adds a new cog marker to the selection list if the selection  list contains a link object. To avoid this, check that the cog marker  is not already in the selection list before adding it.
2. 7276407
Hide Pattern Feature does not work if datum csys  is patterned - There is a call to FREC_is_global_selectable()  in IsRmFeatureSupported()  for pattern features that caused this regression. Removed the call to   FREC_is_global_selectable().
1 \8 c9 p0 K' b8 G% ]( Z; }7419493
A part which has Linked Composite Curve created before   NX 751, and  has source parts completely unloaded, may show curves in wrong position  after Part Import
7424602
1. 7498710 [priority 2] "EB2015"
6 ]5 K, ^/ ^5 M, N; g. ICustom  symbol leader arrow heads change orientation in TCVis  for VDG
, K, C6 j" L. ?2 F2. 7498696 [priority 2] "EB2015"
In View dependent geometry holecall  out dimn values  are missing in TcVis  3. Avoid processing pending instances. It generates an exception.
  M+ U  |- ~8 }7451718
View stored on the SO objects referenced by Associatively  classes are out of date. Editing the Associatively is only changing the  view stored on Associatively class, but not on the referenced SO class.
9 ^) |* n( H& R# M, e1 `1 k+ o7452021
5 O- q, e' R+ q5 \: dAnnotations with extensions are hidden when view break  is applied
7453295
9 N6 R. H* G9 I. JA number of autotests  are failing due to the OM  check world failure of PART_placeholder  object created for stubs resolution
7461929
! z/ }: [- h: s( Q9 E2 R& R( lThis CP  will fix the following PRs  7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,  PR7514922, PR7515960, PR7518217, 8280972
7467273
. c# T1 p7 ?; Q3 y) W- IThe display of assembly parts for grooving tools with  an tool tip junction at a different corner then the first was wrong
7476679
A number of autotests  are failing due to the OM  check world failure of PART_placeholder  object created for stubs resolution
, z4 U, x  m6 L$ \2 ?7478090
% P  `7 z: O! o4 z2 h4 U/ FLeader location of the labels having no text changes  on view update
  r/ z) H9 ~+ w+ o& f# P) ~7479358
8 @' |4 T7 g) m- i2 ACopy/Paste does not handle UI error in UI codes
2 z9 z0 ]3 q4 v; B. F7479663
A number of autotests  are failing due to the OM  check world failure of PART_placeholder  object created for stubs resolution
7484052
A number of autotests  are failing due to the OM  check world failure of PART_placeholder  object created for stubs resolution
7486047
# K6 P! [" `, D3 Q7 ?$ i. T/ B/ cThe Origin Symbol arrowhead is displaying as filled  in JT when  viewed in TCVis
* {' r: z; [$ l- ]6 B' f6 i7489249
+ Z) D; z$ ~# ?9 \2 [/ f8 vDeleting a newly created Ude  will cause an internal error when closing the part
7492187
  R7 j% g$ n2 b8 H' d& g2 DThese issues are EB  related issues and solves the LWSV  cases.
6 ?/ t/ A' A# D0 ], e' G7495264
This CP  will fix the following PRs  7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,  PR7514922, PR7515960, PR7518217, 8280972
5 f& E6 J0 B. J/ A3 X# h, E7498696
1. 7498710 [priority 2] "EB2015"
Custom symbol leader arrow heads change orientation  in TcVis for   VDG
/ m& ?+ g" I- K$ q2. 7498696 [priority 2] "EB2015"
+ `/ t% e' B1 x4 R2 M0 WIn View dependent geometry holecall  out dim values are missing in TcVis  
3. Avoid processing pending instances. It generates  an exception
2 f1 q# W% G( j0 ^" b) Y2 v7498710
1. 7498710 [priority 2] "EB2015"
/ t2 g9 ]$ @1 T& G* kCustom symbol leader arrow heads change orientation  in TcVis for   VDG
/ N% q; ^/ q. e8 F) E4 }2. 7498696 [priority 2] "EB2015"
In View dependent geometry holecall  out dim values are missing in TcVis  
& u- W! H+ B6 X% p7 H3. Avoid processing pending instances. It generates  an exception
7498845
# V5 c* M% Z: q/ }% JThe problem where the datasetname  for PDF export  can be changed if it contains a colon or slash is fixed
7 m% H0 Z+ Z, ]' f1 O1 c; g7499949
0 E/ F/ e1 a+ h- C3 u+ wThe display of assembly parts for grooving tools with  an tool tip junction at a different corner then the first was wrong
7508401
, I0 K8 Z) w+ Z' _9 j# cThis CP  will fix the following PRs  7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,  PR7514922, PR7515960, PR7518217, 8280972
8 H" a. E2 _; M* M( q0 e7509156
This CP  will fix the following PRs  7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,  PR7514922, PR7515960, PR7518217, 8280972
7510245
+ i7 r, f% A/ d" }7 u" l! w8 T; IAn internal error results from toggling a UI setting  for group nesting after hiding the default grou.
7511122
If user resend sends a Assembly with a variant configuration  from Structure Manager to NX,   NX present  a dialog to Add or Replace Variants, this is unsupported ., and user does  Add or Replace it causes a crash. The change is to block this functionality,  and allow only when OLD_VARIANTS  is used
7513312
This CP  will fix the following PRs  7461929, 8277290, 7432871, 7495264, PR7508401, PR7513312, PR7509156, PR7516040,  PR7514922, PR7515960, PR7518217, 8280972
7514048
! Y; l' T3 M5 a: ]0 ?7 ]; g* b0 iThe problem where the datasetname  for PDF export  can be changed if it contains a colon or slash is fixed
9 @7 B/ P2 |4 Q8 Y7 E" `$ w$ _& r7514831
Resolve PRs  related to Daimler Enhancement Request for Convert Legacy Weld Points
. N3 \7 b# o3 }  P2 z7515446
* k. v% D4 f3 K8 p! y7 p. }5 B. AThe problem where the datasetname  for PDF export  can be changed if it contains a colon or slash is fixed
3 m/ k% z% o/ @" m8 O* p3 w6 e( z7516187
3 O% _; f) s$ o$ F- {The OM  check error occurs when edit the encrypted processor
! m) D% o" K  l  t" Q7516751
This is to fix Daimler relinker  cached expression issue
7517130
An internal error results from toggling a UI setting  for group nesting after hiding the default group
" i( C8 Q& ~- y9 ~" A, {% j7519740
4 g; d6 X; J3 q3 W7 H$ {Values on dialog are incorrect when editing MAD
7521681
, a6 k: X: M; p/ y' T* e; n4 p" qCopy/Paste does not handle UI error in UI codes
7526846
These issues are EB  related issues and solves the LWSV  cases
3 J- i& y6 ^9 Y' b7527170
See PR Text
7527332
See PR Text
' r9 _  M: p' K5 H$ _# s8 {7527417
, P! K: G5 R5 M! u7 j0 y: WSee PR Text
( V) g) y9 ]0 \; U3 x  a. m7528470
1 R- h, j$ {5 k; ^' IThe issue reported in PR7522519 that Spark Gap settings  not kept if position values are changed is fixed
7530542
The display of assembly parts for grooving tools with  an tool tip junction at a different corner then the first was wrong
9 A- R: A# h# F0 a$ z' w7533256
4 e8 G! R, [' g' [% N" xThe auto and manual Tool Change settings are missing
8251179
$ h/ C/ q* i2 Z4 C7 ^" h( JIn the old part family template if we add any new  member at last row, the last row was getting replaced with existing member  at first row
4 u( `% f. @- _+ s+ m- ~( g% [8270898
' ]3 \6 D9 |& h+ ~6 oFeature Playback failed due to change in Law Extension  feature
1 w; b3 Z7 F' @  X8275328
Leader location of the labels having no text changes  on view update
8276596
) ]' e5 B7 h- p2 Z- @  [Problem was originally fixed in NX  10.0.3 but the change had to be backported  to NX 10.0.2MP.  There was a new version token added for the MP  fix. That token needs to be reused in NX  10.0.3 so that parts created in NX  10.0.2MP don't regress in NX  10.0.3.
8277626
1) when creating reuse features in a different feature  group, the reused weld points are left in the original feature group
* Z- ]1 O, {$ v2) a change was made to the signature of 2 NXopen  functions in NX  10 that may affect the stability of existing customer NXOpen  functions
8277662
This is to fix customer relinker  failure in managed mode and one IE  with view feature failure in case of part being closed
8510681
An internal error results from toggling a UI setting  for group nesting after hiding the default group
, Q- H8 `' N' J0 Z1127613
Misbehavior Wave Geometry-Linker
1 ~$ ~& @: h: t( D, h. {6 t# ^5 w  @1127821
, H3 z9 ]2 a7 z# {2 k, K6 a1 OWrong tool path computation in PLANAR PROFILE
9 t8 c7 C7 ~3 R$ h# k1127824
Law Extension Miter Method
1127845
4 g, K& t# `, y* t/ ISketch coincident constraint snaps to opposite end  point of edge than selected
1127902
Routing Reuse search does not filter on previous selection
. c& J. J- ]; u7 s1 C1127927
) ]! s4 @: I, GCurve Length BUG in NX  9.0.3
1127954
Error - Invalid view sequence number found, creating  Stock Offset Spline  Point
, X8 V& j' ?7 ^1127974
# o0 w5 G4 b' B& C* x+ c2 X+ lNot able to open Partfile  (last stored in NX  9.0.1) in NX  9.0.2.5 D3, 04Aug14
4 ?5 j3 E. J% O  V- ]- o. i1127978
Wrong Z  direction of weld point created by existing points
! O! a; k% J' p( t$ [, |1128001
  K9 h1 R7 n1 h! L3 y) [+ pUnknown IPW  Collision Checking
( Q2 \& ]' Z+ ^6 G% `" U! T1128175
NXOpen  can't get Dimension Hole AND Shaft tol  values from FitSymbolsAndLimits
1128277
Editing of spline  path created Pre NX  9.0 takes a long time
1128535
Constraints not displayed on screen when creating  path with Lock Length _ Angle
1128541
  {* d; p% b+ E* Z* URouting assembly constraints show the incorrect value  in the display
8 R2 S9 d0 g; W. G4 W8 W+ `1 {, F# R1128678
Cannot add drawing for undercut blank due to missing   EW_COMPONENT_TYPE
+ e- v$ ^/ Z* _- U1128688
Show exact fails on JT  file
1128705
! [5 G, t! g8 K% Q+ \0 mElectrode Design Blank increases undercut REF_Z  value on each Position Update
1128757
Multiple bodies in global shaping results in scattered  sheet bodies
7 q( K9 Z0 b$ g  l4 r1128761
Studio spline  in expand view
" K, t2 X) ~0 |% q, u, h4 K& O1128937
PMI  Reference Plane_Datum  Plane not translated from NX  9.0.3.4 to JT
1129052
. s% j9 D! @  fReference Text Attribute does not update after revise
1129167
Strange behavior during edit reusable components
7 V, N0 M6 |" }( \" T% b1 J9 F1129175
COM  Error 80010100 while creating parts from complex part family
1129227
  G6 _+ l1 I) v% N5 OColors on faces are not preserved during Feature Playback
1129234
Law extension surface doesn't meet quality
1129704
Wrong dimension value in view break
1129803
Cannot create desired development with One Step -  Entire Uniform
1760113
Mirrored faceted bodies get dimmed colours
# k5 O1 V) w# j$ \* v  F1791299
; e* ^  d2 ~% M- @5 w" OStreamline gouges in the part
1793082
CAM: PR - Turning - Toolpath  with Custom Stock Value is not created correctly
1814361
Problem with center marks
1820370
Change in custom boundary stock values is not handled  correctly
9 f; d) O, Z: l' ]! _1 S3 l1822765
% D1 H9 T8 N  P: z9 H* BSame Cylindrical centerline selection does not give  the same dimension
1835918
Retain Annotation font set to invisible does not work  for 3D centerlines
4 ^% v! P" u: ?+ X1 J- M% P1842352
% \! Q+ |/ V0 E0 p$ |2D Centerlines not updated in Revolved Section View
+ `. F- S7 ^5 S5 l6 O* h1844476
9 ~$ \. P2 _* |/ `0 ~! t8251179- In the old part family template if we add  any new member at last row, the last row was getting replaced with existing  member at first row
1845934
8 h5 p* `0 ~# V. f8251179- In the old part family template if we add  any new member at last row, the last row was getting replaced with existing  member at first row
1848798
& M+ ?7 Q0 I. W) y/ B, g6 xNX  hangs when creating Formboard
# \9 n7 L9 f; S* _& @1850987
Place part does not work in native environment
1866971
5 Q3 a; W$ V( Q- a) F/ OFamily Object Name is invalid with specified attribute  and space character
1870054
' s1 N1 A) _6 l1 cOrient branch fails following flip component
1874908
8 A; f$ n4 l9 w, h; @) X' [Create interpart  link default at off is still creating Wavelinked  body
$ N" C. k# d" z+ O" p1875433
/ r" W& a' C, _& ]. nOpen whole assembly in NX  7.5 - opens only one level at time
1878931
- Z+ l* v( q9 F; G4 OKeep switch settings in session memory in selection  tool bar
1884620
1D mesh direction change
1891032
Stock Values for Custom Member Boundary work wrong  when Curves have wrong direct
1903841
! b. D9 k' W" q$ I/ O6 ~& J, T/ sPoints not added correctly when editing spline  path
1908820
! r2 B: F7 e' D( P. x  _  SShell element stress results wrong if plotted vs material  coordinate system
1914851
8 L* V! M: @! u& l, U0 V* \+ FError in Sketch constraints after plotting un-displayed  drawing sheet
1916880
Dimension changes in NX  8 without reason
1918104
3 u! A9 R& R) F$ Q) S& Y1 l* lThread with "Move Object" Feature not possible  to move, too
/ }5 b& k# y! @/ @3 D  T, P/ w/ R1922140
% y, M2 L  Q: }" \/ ]: gRouting Port does not move with path when using deformable  part TODO:VIS
1922502
Lightweight representation icon shown when no geometry  in JT file   ref set
1931502
Surface Finish Symbols do not migrate correctly from  Ideas to NX  via CMM
: x6 O) J) e8 h/ ]. y6 T, o1933385
Added support to translate the smart lightweight views  using 2D Exchange translator
1 p6 Z8 D) v& }+ ^1936453
CMM  Ideas: Surface Finish Symbols do not migrate correctly
1936845
Surface Finish Symbols are not migrated correctly  via CMM 8.5.1
9 T4 U' W; Z# y, b  F1937024
Surface finish symbols do not migrate correctly
9 ]" U4 A; d: C8 }  ^8 S1939250
3 l: A9 g0 I$ I2 Z; |& ?* g# DSheet-Metal-Expression "Sheet_Metal_Neutral_Factor"  locked when change material
9 J' W# o. ]4 S1 A1939354
0 J+ D: i: [% `  P4 @Section function fails at sectioning of Sheet Body  with bad data quality
1940563
3 L* {. U( w, Z% y6 n6 kCAM NX.8.5 - FloorWall  Mill - Use Exact Inconsistencies
1941064
Assign Corner - Mitre_Cope  is grayed out in some routing mech.  sub-applications
. V4 s; a+ s( r1941448
! g; V8 Z9 `1 Q( j* R0 H3 HProvide faster access to reference dim option
' `& U& f/ q2 r) L4 y1942299
% N# I% A2 Z% M+ T2 ^: CSpecial signs in UDE-options  causes error when MKE  configuration is read
1945025
Bolt Circle Centerline doesn't work correctly with  Extruded holes
1945926
8 y. P9 c% [- O6 |8 U/ ]" j& w2 C7 KA deleted or invalid class id was used when attempting  to Remove a Spline  Point
9 \8 k2 |4 l% P, d! f1946314
3 C: B# i; T2 s2 l4 G. H% Q! lThe performance of dragging Spline  Paths is slower in NX  9 v NX 8.5
1947203
/ p0 Z- f/ m- p4 ^0 ]& ~Cylindrical dimension with baseline attached to a  2d centerline
1947660
8 a1 f- C, t# {& b0 Z, SBSH  Check-Mate - order of features in error stack
7 l8 M# p1 p: x  l1948276
; L- v/ ^- c. j7 D5 ZMolded Part Validation shows radial crossover faces  as vertical
: D5 s! \5 O3 M5 J1949117
Assembly components disappear in the graphics window   NX after step  import
1949266
NX  7.5 tool path fails in NX  8.5 when stock is negative
1949429
2 h) N: _& U; g- a% [- S5 d3 @Z  Level, Tool path shifted unexpectedly
7 ~. V- w1 j+ ^5 u1952503
Get "The following circular update was detected:"  but no more during update
1953743
4 F  x; i4 y! B4 P7 @Pattern did not show all details
9 k: Q0 q, c, ~( f. f' Y1954588
4 S5 j: E: c" w) B7 g/ P( dEditing spline  paths of a harness created in NX  9 is very slow
1954601
8 V4 m- @! P4 u$ L) uSpline  Path editing of some segments in an NX  8.5 harness is slow
1954615
Attributes on Datum CSYS
1956064
$ T, I& ]' E' RSimplified thread display in Drafting is incorrect  when partially hidden
1956347
Wrong dimension value when associating the dim to  the boundary of a detail view
9 e4 }# F; V2 w1956365
Export flat pattern should allow to export curve to  a chosen layer
+ h' m  Q* u4 L; Z' {- N1956523
Incorrect angle measurement after geometry modification
( A3 c( u0 P; |( M5 ^0 n( W0 O$ T1957897
# W/ G3 W, |: r$ \' z& a% u9 VOpen and Update JT  facets by NXOpen  without existing PRT  needs excessive time
1958439
Update performance is slow, also get errors in log  file during update
1958492
0 r; H- |. a% O1 E& i: nStock is not displayed correctly after applying Miter  Corner
8 Y& H4 H3 }5 q, P$ s% O1958981
4 M7 G0 e7 `% S7 ]. Y( q( tMultiple Blocks with the same Name exists after using  "Canned Cycles" in Postbuild
1960208
% s0 S; i/ S" }3 t; e# P+ {Crosshatch of exported DXF  is on the wrong position
1961748
Missing surface data when importing Catia  V4 .model file
! v/ I9 H( K  E5 C* N$ R* D  e+ [1962995
% D% X" v4 U; N8 f/ O" xSmart lightweight views with dashed hidden line are  creating huge cgm  files
8 f; A6 ~5 n. F! S; e! G; V. j1963865
" U, Q( Q1 Z) K! R4 H$ GSurface finish symbols do not migrate correctly
+ Y) ?  c9 ?# b4 |4 K1964099
Gouge Check - unreasonable increase in processing  time
: w, a2 S! D* @$ Y: e0 o/ e/ Q& \1964177
Wrong dimension orientation by creation with method  -Hole Callout
* g1 w, ~: t) Z/ N) {) u( C1964498
Weld point command with option overlap calculates  the reference sheet not always
1964791
$ w  o( D' |7 V0 [# J  mHang appears to occur when creating PMI  Dim in a particular view
" u) L- x! z! B9 b: [1964816
Regression: System hangs when specifying hole dimension  in sketch
1965019
Context sensitive help cannot be displayed for Sussman  Bathe or Shape Memory
$ J3 _: q8 B9 @- v1965092
/ X0 O3 `) _# h( E* SOut of Date Status after Component Replace in ANT
1965800
3 A% ^1 ]6 a3 s5 _NX  crash - creating a Hole feature
1965870
" a0 S# p2 I1 j: i  N' @/ _Active Feature Group gets lost
* H2 C) {+ Y; A6 s) M# D1965876
( O8 a" V7 a1 X( K9 ]) |8 H* WNX  Session hangs while creating PMI  -- Radial Dimension with static wireframe
5 A- ^; l* Y" h1965894
Delete of the "New..." row in the Product  Interface
1965948
Extension Line of linear dimension points wrong when  face is selected
1966017
PNT  tree do not open if a JointMark  feature is selected
1967696
. t1 e3 u* P/ r, R* V7 }Electrical Routing: Missing Tangency created After  Wrong Point Deletion
/ h! M- D0 q; E5 W  }1 @/ F) ^1967736
& f* m7 n6 E! ]( VNXOpen.Display.DecalBuilder  needs multiple Commit()  call for correct orientation
0 n8 j( S/ k3 u+ v6 Q5 w. H$ B5 H1969527
Custom Symbol color not displayed correctly
8 @7 q/ m4 ]4 g, R1969815
& N9 ^3 j, Y' w4 LZeros are displayed in the Surface Finish Symbol's  after migrating with cmm
+ b" e7 s' n9 Q$ v/ ^* v1971193
1 m/ m1 e* \5 c2 E, y; ]This CP will fix issue to load custom item type property  values in ANT
1971250
Associatively of datum lost after suppress_unsuppress  feature
1971862
Copying a sheet brings up Errors
. }1 t5 o# ~: f' A1975114
Added support to translate the smart lightweight views  using 2D Exchange translator
1975133
* C: F, q) J- w/ \# f5 CMTD  simulation with PP created in NX  9
" W# X9 v' m3 h' r" `9 {1975385
Cannot copy an existing operation - internal error
1977380
Intersection curve consists of spline  segments, only
1977762
NX  Motion Export: Wrong VRML  Animation in result file
8 {8 H1 `5 ~( t7 A* @: ~7 b" t4 h1978845
Wrong holder collision detected in operation calculation  and ISV-Simulation
1979409
  B3 X" J; R7 ]( G5 M, A) w8 iPart Module: Change Feature without make Part Module  active
- z& o! @/ u/ T9 Z% M1979507
- ~+ c; b8 a1 Dug_udfs  incorrectly transforms sketch and ignores parameters in rotated frame
1979836
% g/ J- v: X  wAdded support to translate the smart lightweight views  using 2D Exchange translator
7 q5 y, U1 ?8 u+ {1980390
Angle dimension failed
: n( d  N, V1 s+ o7 T1980419
- P/ Y1 I5 }1 P8 O4 xPart CleanUp  delete Geometry
1981720
9 o% I, J! Y0 V, R" {* w! ]Zeros are displayed in the Surface Finish Symbol's  after migrating with cmm
1982792
Operations from the first setup get an update if Override  Position is selected
( Z1 K# ?4 _. K* T/ |& l& I8 K+ E" E1983329
2 {3 @8 Q$ f" n7 |# U' R3 c# |KF  %ui_comp_selection  doesn't keep objects reliably using OnInitialize  callback
1983845
Tiny Linear Moves in ZLevel  Profile
1983846
% p+ D+ ]1 o  t4 I! }9 o* nTiny linear move in Planar mill
* r6 c) _) o0 L; N9 b1983847
Tiny Linear moves in Cavity Mill
. A  a+ z- [( c+ I3 y! ^7 j1984397
PartFamily  COM error
: `5 {' F8 ?8 f" V  i1984811
2 S. `) Q) o: j! w& b' VNXOpen:ie:rawBeadBuilder::StartPoint::SetPlane  needs ug_die_design  license
* L: s8 a" m, \+ @1985511
$ [- p& x1 T* l; p" m, PDeformable Parts are not working in NX_CAM  but are able to select
* T. f9 v, C# d) e2 Y! \3 ?1 _' ^1986114
$ y. L8 I/ m* d( @' PSingle Sided Dimension not maintaining its "side"
9 K$ N! T4 T; A6 S' n1986434
PMI  Cylindrical Dimensions have additional leader lines when a face is selected
1986483
Too many RCPs  after deleting a segment of a path
% ]0 y1 v% h8 k9 x3 |: ~- X% z  `" q1986565
Depended features of linked updates
1986593
Part Module: Unable to Pick Datum outside PartModule  for internal Sketch
1986814
- f. R& ]. P& l; K3 zWhen I set the Generic Post placement I get memory  errors when placing part
' r# A, u: U& M& x" X6 j1986929
1 e) M# ]0 A, s) GPMI  Cylindrical Dimensions have incorrect leader lines with user defined plane
1988104
2 D9 Y8 f" @8 ?" V1 sUnable to keep saved and unlocked toolpaths
. [" E0 s- q4 a( U6 y2 `9 T  G1988387
Cannot select face with specify plane after adding  new set
1988505
- M' x' ~) @8 TSimplified thread display in Drafting is incorrect  when partially hidden
1989295
) l9 B8 z, ^9 U. m& q* Y& l- }Display in Views only if a new Model View will selected
2 c2 q* b) i3 y2 j- G& d2 N& w1989491
! \) }% a7 u5 n  E5 @Pattern Feature (Circular) does not work as expected  in NX 8.5.3.3MP4
1989862
Extracting edge from surface is incorrect
( W1 @) s( W+ u3 v) v- g4 j5 o1990587
Marking lines
1990658
9 B* d: n% I3 ~2 P3 dPlacing profile cutout takes too long time
/ W) r, L9 n- D  N+ A: u# Z/ |1990749
Changing parameter consumed a lot of time
1990992
) G  X/ K3 p, Q* I' \" fugnx_caemigrate_tc  fails to convert old CAE  model objects to new CAE  model
& b* U9 K7 [  H& m1992087
A registered save part callback can no longer be used  to save another part
3 |. I4 j. o. J* [1992090
Save of transient context ASM  required, even for some non-associative & Position
1992418
0 ]5 j% H" e6 P- @8 }Electrical Application: MoveRCP_MemoryAccessViolation
' R- c2 R* c+ H6 G1992422
Routing Electrical: TooManyRCPs_NewScenario
2 T1 L+ B( x! u" E: I1992923
# j3 V2 O% y2 W) ~2D exchange creates unwanted hidden lines in views
, a; l, t  ], S% y& h; M1993237
' p) C9 X7 Q& H# h9 }Combine results command issue when performing products  or divisions operations
# X) H! A7 I' l5 N6 R# I& G' Q1993352
NX  Partfile does  not open
' K' X  ~9 O1 K! [: H& g1993412
Second refresh view in drafting cause wrong hatching  for thread connection
1993446
Doppelte Verrundungen  im Flat-Pattern
1993534
$ q( z# i; t5 h3 R& W( NUndo-function has no result on retain PMI
; o' U$ l7 ]. q, h1 ]; R1994309
! e* X; u4 E* b3 Z" u2 u% LColoring of leaders with type Datum at PMI
2 y) P& K3 J) D9 B% Y1994460
  ?+ }6 O2 Q& x' B* VToolpath  has Circles inside by using Motion Output "Line" when Contact  Data is O
4 g5 Y% Y3 i8 z+ o8 x  X) x1994657
Multiple break out sections cause display problems  with Exact view
1994661
Hidden geometry is visible in an Exact Section View
1994690
# I% m; @2 H8 C" }% C6 {7 G3 PMissing geometry after DXF  import
" F1 H# }8 c; x$ ^6 w1994852
NX  takes long time for an edge selection.
1994867
  x% z* r1 y1 @4 MBend radius not changed after changing Sheet Metal  Preference
. U. p+ O  K2 C1 o$ L" p4 E! D1994925
Broken Interface Links
$ A+ W4 P8 F5 N8 P1995028
Extrude of a 2 circle profile to a conic pipe (as  a flagpole) give incorrect res
' c4 A7 r* d4 [/ U5 A* F1995318
# e5 e! i* Z  v4 g1 Z3 t& A% APart Cleanup run create timestamp  problem
1995381
  ~; o( k3 L5 D7 C8 ZBroken Product Interface Links
1995412
$ q5 v% i/ M$ ]Check Mate Connected Part Check fails
1995455
# \; r/ `3 H8 c+ O, t3 C+ u% M3 k& _Transform did not work as in previous versions of   NX.
* c1 O. n' L* S+ ]( ~3 \1995456
& \4 A( K1 T0 l8 H3 a2 `3 z  VIncorrect positioning of a Datum Feature Symbol leader  on a circular centerline
1995474
4 G, w4 z" x8 |# _" J; YThis issue was when two concentric circle or arcs  were used as input to create the 2D centerline, we created an approximate  arc in between, and hence the dimension values were slightly off
$ e6 \/ e8 ]2 v1995535
+ G" {8 z9 J) {Feature Playback failed in NX  9.0.1 in NX  8.5.2 it works (2)
2 w2 b1 q% o7 {' N5 @3 Q3 V9 w1995544
6 K9 E5 R" F+ s1 Z" o5 q' P' vChangeAngle.prt  Feature Playback fails in NX  9.0.1 in NX  8.5.2 it works
* R( A1 ]+ x5 Z! H1995774
* b. ?, P2 x% h( T: w1 YNew part family configuration could not be created  results in com  error
1995823
Lightweight move collision detection not working for  certain JTs
( E1 j" ]9 Z3 q. g1996112
Replace Font with character font utility - cause move  of a text
7 S6 _1 D8 |! t1996187
Import Part imports an old version of the component  loaded in session
2 }8 M1 d3 z( a4 W8 {1996473
Law Extension Self Intersection
1996714
Unable to edit and reattach a constraint
" k" W4 U- Z- o( W1996781
Reordering of Features results in wrong timestamp
' C  f+ Y6 l1 U- A" {. ^3 m1 H3 q9 P1996783
Missing split view for linked objects
1 M, M& N: w& U+ Z4 \4 E1997428
Part import with reposition leads to exception error
/ y6 D& {9 B- c9 F2 B1997453
9 s0 p1 f# v# t& BWiring slow performance to edit splines  of 85 harness in NX  9025
1997488
; v: z; q4 M% c7 _$ _NX  displays different object direction in linked part
+ _4 {- Z: \) h: d. @1997625
Changing settings of view raises error: "Settings  are rejected because one..."
1997635
* ?: d) \- s/ O: U3 mInterpart  update does not catch 'out of date' links
1997648
5 L" L6 I1 Z& w" ILinks lose references after synchronize
1997703
Inconsistence of body selection in link edit window
1997890
Place Part Query
* u- x2 @; u: E) d, `1998095
1 e  _3 a2 A, f- W( R4 a) w4 ?) TFeature Vector Malfunction Selection
1998118
Law Extension with Folded Surface
# \2 ^- B! `, a1998235
Assembly opens as modified, even after repeated saves  and updates
1998364
. Q. s! ]: ?) j: K" W2 XMove command is inconsistent with respect to Datum  plane
1998413
Show_Hide  does not work in specific scenario
' `1 ?" O6 q2 Y2 j5 n1998417
JT  import delivers wrong orientation of parts
0 {  `1 h6 o, j1998420
Product Interface selection is wrong from Part Navigator  and Graphics
- Y6 }; n  I, c1998521
# G) `. j4 Q( w% \& {$ O& K8 ]Internal error in WAVE Geometry Linker
1 O- V2 m2 D/ w9 v0 q6 W  f1998549
Lock perpendicular Leader for text not working correctly
1998551
Null Tag error from remove spline  point after detach a spline
7 \5 o" `! O1 i1998596
% [$ {# f5 R" b  {3 O/ J5 hOrientation of parallel dimensions changes after view  update
1998689
6 z( ]! c% l- M7 mFine Finish Offset in Turing produced wrong Toolpath
) G" F+ S" Y5 L( M( i1 c4 n1998741
Export to dxf  missing values and dimensions
9 @: d7 C+ A; S' `! \1998774
; A" c; x) Z0 U0 H, BUnable to get Reverse Direction option on Baselines  to appear
; M0 u9 _7 A- T9 Y; J1998805
Change in the parent part is not shown as Out of Date  in linked child part (PNT)
' u' l$ @: O* m0 g1998878
Need API'S to access Alert messages that are provided  during weld edits
1 y1 \0 _0 U, ?% X1 Z4 \3 |8 b1998890
Parent of broken expression listed as not loaded and  has wrong status
0 B! o4 a$ \! ^+ z1998901
Pattern Curve in Drafting does not update when count  value is from expression
: X2 K4 C7 E7 |9 `1998927
$ U  X5 M+ g- U9 z, v" gChange the selection priority of product interface  bodies
1 q' A/ y; H, y; r" `1999032
8 s% ?2 g0 p# e) j/ YReplace Feature makes link 'Out of date' and Synchronize  Links shows 'No Change'
1999035
Clone "edit existing assembly" internal  error
1999092
9 c" W0 y/ P9 T8 W/ M* M/ l! |6 ZHorizontal dimension are incorrect
* I( b. H9 P+ m4 h1999100
No complete hiding of initial feature after extract  body
. J( n! |+ |8 x  X4 e( Q% A4 F' b1999129
. |3 k( L% X% |7 o9 s. [. sBody measurement does not update automatically when  material is changed
9 X; e7 C; x8 q0 h: B, k1999130
+ {, x- u7 P% |Incorrect out of date ANT column value after replace  component
1999154
Nastran  import including Materialdata  NX 9 vs. NX  10
1999165
  X. T4 x% E7 S% C& LWrong results for profile endcuts
, Z# v* C4 c8 k2 W1999211
1 i0 S; B7 n& B: x3D Tetrahedral meshing of the part is not possible
- N6 |! m' N( e2 T' i: l  ~1999215
Wrong update status with wrong synchronize reason
/ d4 \8 F2 K$ r& {& L1999224
PdmSearch  Simple causes the TC  Nav to error  on a simple search
1999226
NXObject.HasUserAttribute()  returns unexpected results for attribute arrays
1 p$ l' l; `) M; a1999233
Cannot save part after creating render set by NXOpen  without drawing view
1999277
Updating legacy weld elements individual
1999279
. P% N: r# e# zOpen by Proximity not working for certain JT  files
1 S3 c6 a/ q% k9 m; N% N4 t* x# p1999286
WAVE Update very time consuming
1999295
Update to End takes longer than in NX  9.0.2
8 t2 \" U+ H6 l1999301
Make Current Feature is slower than NX  9.0.2.5
1999319
Open C  API UF_DRAW_ask_render_set_parms  and Wrapper fail with NULL_TAG  input
4 z5 M7 X  m/ F; K+ T1999503
+ {: k- x5 v$ Z: e! W+ yRegression on exporting NX  to DWG
1999528
3 z% l1 o$ F, ^* i1 w% X. jFit Method Curve Quintic  creates wrong open curves when extracting edges
1999537
KF  %ui_comp_selection  OnInitialize  fails on NoHostPointer  with fix of 1983329
9 ~/ I) X: y+ t4 C" b1999673
+ S. K; ^" @$ v& f1 K* bLaw Extension Gap
2137349
  C* c4 x: [  i% L8 X8 j3 l' LCSW  : Retained 2D centerline mark is displayed at the absolute origin
8 |8 ^( A9 N' [& |$ W; o$ @2137927
CPJ:  The result of 2Dexchange is not correct when drawing have UserDefinedSymbol
( D1 S- K  j: a; d# x2148879
* V0 c- |2 t' e6 D! j# R* ]! [NX7513MT-Part_Open_Error, Cannot open NX  5 part in NX  7.5
5 `$ R- a* g8 R+ A2150055
  L0 v1 W" w6 l# J) H8 b! `$ {0 y8 r[Routing  Mechanical] Inconsistent results observed using Place Part
2155147
CPJ:  Internal Error occurs reporting stock information
. r8 G0 q5 i& G4 X2163939
& u) r% h* J8 |$ N: T9 m9 l( HHNS-TWS2 Redefine "Stock offset Point" vector  direction causes Internal error
/ c3 m# I0 d4 W( W* U- h# X2164397
( j/ N% A9 l6 O9 q0 t* k! Z) G4 dHNS-TWS2: Replace 2 occurrence of a component raises  an Internal Error
) w" c( n1 e9 [2165932
Routing: "Overstock" deleted when I "Detach"  and "Move" path point
% l& Y: l  T3 f2 g( P/ h2167015
. U! v4 L3 ?9 P% [1 l: A+ |$ Oi-Test : Radius Dimension is not placed correctly
2167956
An internal error occurs when the user moves the custom  symbol
2173887
% Q. I7 T# x0 @Routing: Cannot determine type of stock for specify  item. Dialog will not launch
) p% d  u% m& w; i) m9 t  s5 }2182328
CPJ:comments  in "uf_object_types.h"  are insufficient
) H$ V3 s% d0 p) r: x* z$ l: M2184729
: V& N6 N# m2 s0 D+ A% gInconsistent view display when executing "Invert  Shown Hidden"command
2195219
. w* C6 i3 I2 T" l2d centerline only half display in NX 8 with GCtools  environment
( H" n6 [/ x# ~% K8 c' p* h2197682
+ o" p" ~* C) pAfter play macro the color block dialog is gray
2 l; u* q5 q& `* E" ^1 Z, A2198372
# u$ S# |8 `; XLine Arrow config  is not used dimensioning to centermarks
1 X$ j  P6 }. C6 l, U2201567
Posting output shows mom_contact_point  error in NX  7.5
! c8 x& ^+ ^. n6 D9 a7 U" V/ g2204645
Can't perform additional bend to the existing Run  in sub-assembly of routing app
2205140
uf5947 consumes memory and does not release it
+ G/ ]2 {4 f9 B- `2206496
9 k9 e. ?% D' B" YCPJ:Cannot  remove a placement position when edit master
2206865
3 @' @' g0 z9 z+ V8 U& Z3 C& i% PTransform path disconnects the segment from path
2211849
Minutes to Delay option does not work and "Batch  Processing" runs immediately
2215177
Spline  path cannot be moved by Transform path
. f% `" }/ @0 z2 U2216781
5 O+ o7 J& l8 S2 }# NSurface Finish Symbol of .asc  file imported into NX  8.5 is different with NX  I6.3
2218055
Internal error occur when I detach the path point
2218282
% B* O; v+ ^* b( z5 [7 @C9 Need "Show as Reference Dimension" option  in "Textâ200235 hotspot  menu
8 }% _# M$ q5 U* Z# }2218340
Tolerance setting list in popup  menu does not have "Reference"
- }4 }' l1 T' n2219922
3 R/ [8 `) \+ F2 I9 KNX  8 has stopped working
2220089
1 r# h! v' Y: e0 T. F/ l- ITransform path moves routing objects partially if  other command is used in b_w
2221345
The control character of Note appears by "2D  Exchange"
2222403
Dimensions move by "2D Exchange"
2222405
Target: Select Body is missing a selected object is  consumed by another feature
3 O* _  a, P/ m0 V! H( }- ]2222514
9 ]& J2 O# h# CUnable to transform path by selecting the RCP  at bend
2223446
9 F2 B" N0 R. y$ c0 b8 X: HSpline  path point get created in incorrect position
7 V7 C( T2 f( r1 y5 E2223719
Customer would like to edit Jog by using shift key  when editing the Ordinate dim
5 j8 v! S, s/ q0 z1 l' d$ d2224311
8 k" N/ p" n6 NAdded support to translate the smart lightweight views  using 2D Exchange translator
( e5 ?' Z- o2 P) |2226256
CAM: Teach the meaning of the message outputted by  Create Feature Process
2226295
Display Springback  and "Output Springback  Facet Body" give unexpected results
: I# R8 K9 L$ o# V' {2227008
( B+ j/ J  Z7 ?% W6 cCPJ:  Internal error occurs when a point from spline  path is removed
0 C, a- I- |' @! F& F2227411
: K+ Z8 t3 P: l" l8 W8 U# q7 ENX  900-EAP2:Rapid dimension command falls
' d9 b# n' q; {, M7 H6 \2227996
8 c8 F8 {4 @! O: }8 vLawExtension  outputs wrong result on NX  8.5.1mp3
2228587
Save response is unusually slow
, t% F& g" a; b2228589
Bend Relief is not created by Convert to Sheet Metal  command
2229228
Drawing  Update causes Datum Feature Arrowhead shifted
2229331
Leader is changed, when tryed  to change the style of datum feature symbol
( c7 ^) G4 t: B+ l2229335
NX  freezes when creating sketch dimension with selecting point of datum CSYS
% b2 D2 y/ n- K0 e2229408
2 N% r8 U) N; ~& |# z# c. L( s. UCreating Branch Path is caused Internal Error
2229417
Spline  Path options failed
# _2 ]# I( v) Z; I+ `2229425
About move of "Custom Symbol"
3 a6 c2 e, J; Q' ~. N2 o3 T2229795
  \. L# [# Y2 J+ m2 T/ Z" @+ xRemove point of Spline  Path with Built-in Path component
2231384
. }5 q% b. t7 B. I- M+ A: t1 x5 S. R9 rThe Drafting Standard is not applied to the new component  part
# Q8 a7 u4 a: l% T( a) V  Q8 V1 i2231549
; g- U: S, A0 v0 GMolded Part Validation results differ in different  versions of NX
2231678
* F9 W3 {# t& sAssign Corner->Bend->Inner Radius gives incorrect  result for certain anchors
2231761
Routing: Null pointer supplied to Routing error occurs  while editing an S-Bend
3 H' R% e& @! _. M  P2231762
NX  crashes while trying to create S-bend
2232056
Getting message "Could not get input entity's  class" while using ugtopv
) q( `5 g% E. Q5 [2232774
- O6 ]8 H$ ]3 i( ~& c- [. GThe arrangement position of Datum Feature Symbol is  changed
4 }5 S7 Q  B! o3 G1 X' V# S; v; U% x; }: R2232967
  w& A2 \4 t) T7 i& w3 HSM  Attribute already existing on this entity message while translating JT
2232970
View dependent edit do not work correctly for "delete  selected erasures"
8 n7 k$ T5 f, N; t0 `9 o+ D2232989
[CAD]The broken Bend RCP  is missing in NX 8.5.3MP1HF
2233315
[Problem]COM  error 80010100 occurs in NX 9.0.0
2233554
  n% v- b8 G% J7 y4 X* y  SThe display of the facet body changes when the scale  is increased or decreased
2233784
Phantom font of section line is displayed like solid  font
2234302
. i8 @  G# T& Y; P" @CPJ:  "COM error  code 80010100" error is displayed in Part Families
+ ]% B6 l! X+ y! i8 b2234546
& J: K3 M0 {; t1 ^7 P' N& N3 ^When you import as the Real Dimension "Folded  Radius", position shifts
2235058
3 y* S$ }# G" g# WBatch Process does not work in NX  9.0.1 and TC10.1.0.1
4 p" G+ [: \/ j2235206
NX crashes while changing the stock diameter equal  to adjacent diameter
2235411
; x+ w! k/ V' ^* o0 A6 nLeader line does not switch the position, when slide  a Text to left side
2 Q& |& l& T" g; k2235665
Can not exported to JT
2235795
User defined sorting order is removed
2236263
NX900_SZK_OD Selected point of dimension is shifting  while open drawing in NX 9
  u5 Z) h, e2 y" ?: w2236305
Spline shape is not reflected when changing Shape  Type from Slack to None
7 k4 ?. o# m( u) n/ R2236564
, w: {# Z8 Y6 w( z6 \URG:Connectors  rotate while fixing path length
2236612
The editing contents of the "Custom Symbol"  are not reflected
1 O1 @3 s$ C/ ]: g1 _; S8 U2236655
( r& P* ]& [& x2 U2 ?8 l% [A view label letter cannot be changed into an unused  letter
2236665
6 w1 j; }1 n, {  z% n- h' KInternal error occurs when a spline path created with  slack is edited
1 y# w7 h+ H, [; ?- h3 }6 E2236957
3 t* w$ n- G4 b# _6 y" |1 jiTest: Adding a path point causes an update erro
2237709
Autoroute fails in Electrical Routing NX 8.0.3: "Stock  not found"
" z2 S7 M. p" C4 A* z1 j' H2237830
A part cannot be opened with an error "'A deleted  or invalid class id was used'
2237851
Batch Processing does not work in NX 8.5.3 and TC9.1.2.4
2 r; V9 p  X+ w; S8 h$ ^2238399
- X; T+ x0 {$ s  x) xThe length of the path gets longer than length between  Ports
8 f5 k. D) k- F8 V) n( N# I6 Y2238690
6 b1 v6 p3 W) W! f, y8 g* Q) TCPJ-VUP: UAF Failure(NX 9.0.2.2) Update warning for  Convert To Sheet Metal
2238751
1 z' W1 l5 v0 I- BWhen export the dxf format, position of view is different
, j& W% {2 ?# |1 v7 n9 z2238803
8 Z+ D- w: t2 qExactly the same checker is not identified in NX 7.5  and NX 9.0
2239326
Revolved features and the Tool body are created when  generating the operation
* F2 E- O% a; `% s) C2240126
$ l- V% d" G! XResultant shape of Convert to sheetmetal differs from  earlier versions in NX 9
* \! H1 d7 B. E& D2240189
[CAD]When the spline path is subdivided ,Space Reservation  is deleted
2240291
  B# c0 U3 A# b# B5 D% rWhen united component is selected in PNT only target  body is highlighted
2240560
[CAD]NX crashes while creating a connected spline  path with space reservation
( r3 I2 ~- U! A: u2240574
[CAD] NX crashes while subdividing a spline path with  space reservation
$ P# V# n. u( {! V7 h+ B. E2240989
The tool and the holder collisions occur by using  3D IPW
2241153
When existing sketch is modified and switched to Advanced  Role -Internal Error
' V: I& Z8 B/ B2241162
% g3 D; p! K+ V, jUnable to hide tabs in blockstyler through hide method
$ b2 j( i- {  k) K7 R' J% g% Y* \2241172
Error recovery completed for the following error,  while to plot TIFF image
2241246
- X/ U! o) m; ]: JFile in use by another process error occurs while  saving part file
2241318
Memory access violation When trying to change the  role to "Advance"
2241356
Density value "1e-006" or less cannot be  set in Customer Default
2241431
. J$ K: z# o2 [1 C% [4 O, @  ^Incorrect Unbend output for cascaded Sec Contour Flange  on curved edge
& s5 F# u' t. d7 c( d6 z1 w! N1 d0 J( D2241487
Invalid Hem flange output
7 s" C* X& h7 i5 Y  ^6 |2 h2241894
  H3 l& Q5 N) r! y) `8 H" oShow hidden objects in comp with Ctrl+St+K (Show Selected  Objects) not working
2241920
NXOpen.CAM>CAMSetup>TiltToolPaths() gives an  exception as "NX error status: 1"
6 ^# w. @4 g, W5 e1 I1 [; W) w2242262
% P4 r! a/ r) C/ L[CAD]Law Extension face has a large gap than tolerance  value for the input curve
2242291
7 M  ?9 c2 ?. [$ ]6 h3 S2 y& dCannot create single sided Cylindrical dimension with  outer dimension arrow
) b1 I8 d" P: _9 o6 @2 N2242338
[CAD]Selection intent of Trim Curve disappears in  editing
2242373
+ `/ F& s, ?, R8 @. NCannot create Jog to Linear dimension which is created  for '0'mm distance value
2242385
[CAD]Law Extension:Change distance tolerance,after  vector is reversed
2242392
- E' Y: N0 j; R; J6 s3 HSome commands cannot be found in Japanese env
5 P, [6 D6 ^: i! R' S6 S2242424
1 C2 Z2 ?) y+ T; V" xHem Flange does not work on specified edges with "Material  Inside_Outside"
/ M% b. I3 ~' [  W' p5 s  n' m, T2242635
If the display of an object is changed, it will be  in the status of OUT-OF-DATE
2242764
/ j$ z. i" w( ?/ O5 O* W: xIn [Merge Disjoint Facet Body], facet's Shading display  changed
2242938
Spline path's shape type 'Lock length' gives incorrect  result
( e; U* k, \8 _4 B' `. t2243057
' E; k1 \; J4 S8 m6 Y5 Y$ HNX 9.0.2.5 Power drafting issues after import of AutoCAD  file
2243201
Match Edge gives error as 'unable to build surface'  when ref edge is a line
2243238
' g9 j! m+ Q1 S* C6 [  c! _Shipbuilding weld seam, drafting command doesn't work
! w6 ]. k- s4 T: A3 i) `2243565
5 F5 ^, k7 f& y, L) iCXPOM_wrong_class Error occurred while creating setup  in NX CAM
+ \2 M# m" |  n5 b% `* L2243707
Ordinate dimension-> Place Automatically behave  strange after drag dimension
2243819
The name of "Expressions" is not normally  reflected by "Reuselibrary"
2244840
2 d1 `9 @. Z0 B) s$ DUF_DRAW_set_view_display is failing to set hidden  line width as Original
2245086
Holes are not created when we do [Subtract] with outside  work part as Tool
. K/ d0 f4 o4 i0 m& L2245493
1 n6 O4 u. ~! I; ANX cannot change History-Free Mode by Internal error
2245777
Reset occurs to Transparency of solid body when using  the MPV
2245948
&CSLANT does not control text angle for NX font  created in NX 9
2246125
' K, d! h) b! Q7 GThe thickness inputted as formal has changed to the  constant
2246501
4 G. L& }$ G, p( Y6 s' {When Descriptive Part Name Style is changed, PartName  of PartList isn't correct
2246708
. ]9 V* J: P- j  A+ H  `, u6 v) hIt is very slow to opening a motion data without loading  its child dat
2246872
: B7 l9 m5 v. }7 A, k7 C+ Q1 K, QNX 9 hole table does not recognize all holes
8 b( }+ ^+ Q% \* s5 U) b5 P# Q) C2247291
When I execute Part cleanup to drawing part, NX change  position of Note
2 n. i; z+ J3 P) r* f2247292
/ T6 \7 g. \9 g( s1 X5 Q+ A[CAD]When I execute Part cleanup to the drawing part,  NX break Note
* F! w, ?" O% ^+ x9 s0 G0 Z7 W2247496
Update Error occurs by "Merge Module"
2247508
# R2 F+ W. t( uNotation difference in a filename extension pull-down  at import I-deas ASC_DWG
7 x" Y. V/ x, g+ |) O2247535
Drafting element is selected unintentionally
  X7 P- B- [" W9 I2247548
Unable to merge facet bodies by Merge Overlapping  Facet Bodies
: x# d  m# Y2 t1 `6 T- w3 ?! m2247593
NX display line of spline that is made by studio spline  on the drawing
2248072
! x( V' {: S6 yThe created trim length exceeds "Minimum Length"  value with the warning message
2248291
Cannot select lines after export 2D part with no associatively  to 3D part
2248471
Alert indication is not displayed in PNT though parent  body is missing
$ f. U. _+ C: X4 Y2248732
0 A2 g0 r$ \, M$ [2 C9 Z8 O3 ~( CThe behavior of Check Regions of MPV
- P9 Q- B" i9 b4 M( b  S2248810
) D: H, S* g- |$ L1 w0 JUnable to convert all drawing sheets to IGES in NX  8.5
. A  b9 _: w+ ^$ [2248814
NXOpen C# Wizard creates external (batch) program  that will not execute
" Z9 h4 u4 D3 `8 x2248853
ExtractFaceBuilder.CommitCreateOnTheFly throws an  error
2248905
Wrong translation for "OPEN" in Reuse Library
2248909
Copy Template as New Design in Reuse Library is not  translated
2248936
UDF body color display changes when inserted
' v+ _3 d4 [% H' e+ X2248971
UGMASTER is not assign when saving as New Item with  Automatically Assign option
2249161
Attributes using expression from Reference Text become  incorrect Value
2249327
The name of body changes by split body operation
$ l/ {. |9 j0 A: y! x5 l: Q1 M2249328
The element in the non-indication layer of UDF is  displayed
2249356
( e) R# v  _/ [& C- fProcess of creating a dimension using "Rapid  dimension"is slow
2249493
Cannot able to select the same dividing object datum  twice in "Divide Face"
! a' K8 D. N) d/ [' {: U2249504
Angular dimension is changed when execute plot
1 Y6 o$ k1 f, X" n7 ?# T' }+ [2249529
# L" G) r3 w0 o) `When exporting 2D to autocad, balloon circle disappears
# J! o# E# h) n2249546
8 C; H; m; @' Z# K  h, FNX output wrong result with node information
' G9 i( _3 s( P9 I/ K3 n2249857
Can not save the suppress information when save drawing  file
2249910
" F! `3 Y( u. K+ kNX crashes when double click on "Expression Check"
2250055
The Vector arrow of Ribbon builder is not displayed
  a$ W4 X1 }, b3 i( ]2250205
Problem when inserting in [Note] the expression including  2byte characters
. @' t; e% T- q2250337
( X2 r1 O# j# @+ KExtra NC path generated in Flowcut
0 U: G7 c3 z9 J  k. ?+ m2250351
; x6 J4 ]- a% O! VNC path twisted in particular area in flow cut ref  tool operation
/ s) C! K1 y# u' m2250474
Non Uniform NC path generated in flow cut reference  tool operation
+ ~  i1 j$ p9 q" r' g4 J4 m" g2250476
A extruded tool path is created
# N5 H( [# i3 Q; a+ V2250573
2 @/ _5 ]. F4 I& \& ]1 a8 c/ @Dashed line changes to a solid line by NX Plot
% _( l9 l  W& L5 t. C, @4 J# ]2250687
, x7 L5 r. `" q5 B; e1 v/ y5 aIn Transform, Mirrored Lightweight Body's (JT) normal  direction is inverted
7 m! R, e! b- X. Q& N' ?, w2250705
; I! G; T( S' }1 S/ i1 ~[CAD]Law Extension create incorrect surface without  error
2250808
. O- P# ^9 H" ~3 ^Exceptions occur when ug_body instance uses 0 for  color in NX 9
" e1 _+ Z; H# n6 n; m2250942
Engage of non cutting moves is cut over
2251030
6 l' m' S% H  D5 z2 fAdjacent spline path's shape gets changed when double-clicking  a spline
2251097
Inconsistent about the display of SubCategory in Material  Information
3 @# W# h: d1 ~) Z  j, `2810191
# w% Q! k1 n6 L, z7 ^, g3 G+ RBallons  don't update during the update of a part family member
; M: k) j% a; C6 A5 W6248511
Bend taper fails if applied to bend on bend
6305080
Note linked to an interpart expression rounds differently
& z7 v1 S0 v& k  N& M9 n6386183
Datum associated to stacked FCF produces gap
6400356
2 |# K8 r" |7 U  s: aGeometry Linking Failure
6424822
CenterMark referencing ThreadCircleSymbol will be  retained in update
2 a# d& J  F; r/ x- w9 k6472032
Center marks become retained after updating view
6487324
Invalid section string definition
6496575
It is copied by wrong distance
" S! X* e+ V: y6 h# s2 H0 y6 v6498114
Unable to create angular dimension
6498459
. _' W) b6 r+ j3 L) |8 {4 ?Routing: Neither endpoint of segment near RCP
+ U( Z' n1 ^2 d! Q2 O2 L7 D4 r6499312
Internal error during transform path
6502266
2 W! b/ t$ X. B$ B. @7 ^! KAngular line at current segment option not applying  Fine Finish Offset correctly
, n. S9 k$ l& m6559724
Dimension missing gap on centerline
3 w5 u# _0 f  Y: ]: M; u6561267
- E! E, _9 C7 b: R. E# u6 kUDF with Feedback expressions - Apply does not create  new expressions
6566556
Retract move not in Inverse time (FRN_G93) feedrate  mode. Engage and Cut are
  x4 J) b) F* q# U6 |1 E6570966
+ E( v3 A/ c* a5 v. j& cFourth axis limit violation fails and then outputs  incorrect A word
6603636
Planar Profile tool path is not following the pre-drill  point
4 \5 A& A+ T: r: s" D% t. i8 Y6631793
  L& W2 N; L" ]- N% S: `Linked ports created by filter setting Face_Two Lines  are not have associatively
7 l, w, Z0 O' H$ g, _4 A, O6632138
Assembly Exploded View Trace Lines do not translate  into sidecar.jt
; b* k3 e# b2 y7 `' D# K6634232
Drafting dimension extension line gaps not reliable
6647078
: t( R$ }& U$ cP8.0.1 - Transform path on routing branch removes  corner bends in other areas
$ E: Z" M4 z" ^& G+ U' |! T6681423
4 \8 o2 V6 s' ^8 i" ?1 iRouting corner angle dimensions are off by small amount
6687752
* W% z) @& m6 UAfter generation the main dialog has a new option  'Verify Pre-Drill Points'
8 ]( D3 e7 a' s5 L8 Z7 |9 T6700641
* {: H. ~1 x$ x9 ~7 K0 oUnable to use function "ath Length Annotation"-part  of Drafting module in NX 7.5
6713291
Show = False on a Tab Page hides container items rather  than the Tab itself
/ q- N7 D+ y4 U6 _* ^6717554
After execute Import Bend Radius Table command, it  could not find Bend table
6718129
If segment end RCP selected on Transform Path, it  was moved only RCP
0 Y/ l0 j8 {2 A9 s2 L' l* l6718165
Number attribute value rounds when added as a relationship  in the Note editor
6718800
3 c, Z" m" V8 Z2 \Replace Stock is not working if overstock created  only with Routing connection
7 E) L" c/ t$ ~5 p2 K6720314
% g8 Y4 u# _2 t3 P5 jIncorrect stock display for Transform Path from one  routing path RCP to other
6720951
Transform Path is not working for distance value measured  by Measure distance
6723898
Cannot use Discontinuity RCP as path start point
" y& d$ x% C7 x! k3 |0 }& q  N5 z" k$ X! U6725087
+ U/ C+ x5 X5 m/ t. CPost builder; not getting circular moves output for  G18 plane
! i5 Q; r% E+ J; Y( A6732556
! Z  }/ g% P/ G* mWhen creating a formboard get the message "an  attempt was made to associate ....
3 g" o" d6 _, T! q) r6745860
8 a% }5 W7 r6 U% v: u1 i- }: PDefine Run-> Member Items does not auto-select  Path
6747193
8 S* ^+ B8 N, x% X, P. [9 RTabular note cell text is not updated with attribute  value after import part
6751549
Transform path- incorrect results moving "TEE"  & branch along path
6754338
Radial Bend is leaving connector and removing stock  on Formboard
6776759
The same title cannot be used on two different attributes  error opening assembly
" ~/ W: t- O' V, d/ w6 h7 s6783887
Transform Path move or copy does not succeed on entire  harness
$ ~! }+ ], ~& G6787919
) Z" A2 L# \8 \- lUnable to open part file due to same attributes of  different type
" o1 c/ K2 X, |: Z9 I* n6792884
Empty line is removed from posted output file and  when viewing in synch manager
6796983
CenterLine is not adjusted to manual boundary
% j& @: ?: z1 v" l7 K6802602
3 ^- v* C' b' E! Q7 g: w0 qPMI Datum Target: Symbol leader not associative to  point in assemblies
! t9 z/ L4 i, ?3 W6816157
Routing Length: "The same title cannot be used  on two different attributes"
6832974
- r) Y+ c/ ~0 ARotary axis incremental and sign determine direction  causes wrong output
6844669
Spline path end node hanging when using Control D  in Routing
6851770
PrintPDFBuilder Commit fails when used on a non-displayed  part
& p* N4 J# x) b8 D- v! M+ \& {. I: M6857961
1 i) F8 i4 C7 o7 f4 @+ l# {6 ?Routing Run Nav Place Part not handling attributes  correctly
3 L: t0 w  ~5 ^0 c5 `6867051
# f; b! |: a: i& T: s6 Z2 ~Incorrect results from Check-mate "Report Features  without Children"
6873282
Predrill Start Points order not followed in Planar  Mill Profile operation
6878962
Ordinate dimension will not associate to centerline
6879827
Boundary order not following Region Sequencing ->  Follow Pre-Drill Points
6880816
Check body not being recognized. Tool is cutting through  it
  B$ W2 X( N+ W" Y; D: H( W+ @6886712
/ o. G$ X; a1 ^( i5 s8 e+ dError saving JT: Failed to import remaining data from  foreign multi-CAD file
5 F! Q3 m2 }% E% J5 z- s6888187
Documentation specifying nx_pmi_attribute leader_leaders  leader_value is vague
! {; |+ M  I5 S/ l6 W6888421
Reference style on tolerance pull down for dimension  edit
6891680
Autoroute fails in Electrical Routing NX 8.0.2: "Stock  not found"
9 N2 ]) H/ A# ^9 {- C: K* i6892275
Transform path on a RCP creates unwanted edits
; |; p# J/ E' o8 o2 M7 A7 R6892318
Adding Bend causes undesireable edits turning Transform  path
6893189
Convert Legacy Spline to V9 Spline on Selection for  Edit
% A. o% E; C2 ?: {* X- o% s6898282
$ y& H1 ^8 k& R- u: |Mechanical Routing: Transform Path not updating edited  path as expected
7 ]' t' D. a- r! W! x2 S6907497
Dimension line passes through appended text when dragged
6910642
Transform path affecting paths down the route
( f( g! {0 E3 i/ j$ ]3 u5 d6910694
6 J9 d$ k+ |* e6 f- r& v& X+ }Transform path does not dynamically update paths
* I) ^8 ^  x, g6925479
) e6 J. {  x! Y1 q( O/ V* Q/ I5 r$ NCustomer Default "Teamcenter Ship Name Format"  option for Item Name vs ID
$ S! ~1 F/ R8 ]6932644
Lock axis with right angle head fails
% X1 x2 A, T4 h% n% e6938319
Predrill Start Points order not followed in Planar  Mill Profile operation
+ N% H$ J0 T5 c8 i6939350
2D Centerline used to dimension Flange radius sends  leader endpoint into space
6940940
Possible values for mom_rotation_mode incorrectly  show ANGLE instead of ATANGLE
6942194
/ u2 c1 @; x# a& {3 SGetting incorrect results on stock bends when transforming  path_stock
6955239
Law Extension Builds out of tolerance with no warning  or alert
6962826
7 h. S$ Q7 I3 p; {9 y% VNull tag not allowed to edit ordinate dimensions
1 b! g) r6 \% r" D9 m6968811
NX 9.0, Edit Spline path "Detach" is not  available
8 Z+ j- p- ~7 H# w) s9 w6972365
" p5 {' X, D5 u! k2 K* T+ b/ d) R- yPart Cleanup (Delete Unused Fonts) changes the Symbol  Font File Font
) [! h4 u/ s% Q6976274
Routing stock inverts at bend corners
; [* a5 B1 F: d; Y- c6980142
' ^9 k' R3 B/ J& c! lUnable to open CAM file in NX 9.0.2 and up
) I) L% T/ G( ~. ?6987003
# {# G5 l( A# D0 S+ x( u4 }Routing Assemblies are Modified when opening in the  context of a Reuse DE
& F2 o0 E3 y3 \; \) B+ P1 @0 y0 a6987730
NX 9 Drafting save Work Part only. takes about 1_2  hour
1 `* y( b# U9 R- v. V6988503
# I6 S  f  K( E* iCircle_Helix moves are not linear moves in NX 9.0  when 840D UDE Compressor is ON
6988562
Adding support to translate the smart lightweight  views using 2D Exchange translator
2 B& x* M+ e0 [7 E1 k: A$ s6991672
Opening a JT file, what defines the units _ comps  are scattered
: N! b" Z! P: B# i" ]& T! E- t7001160
9 e9 a- d& X4 E, }8 V) LPart clean up "delete unused fonts" switches  the symbol font
( m+ n4 }+ \; n% k( g$ ~% k7104392
+ g9 |/ @6 y- H( z* c+ W  xNo information on mom_operation_has_path variable
7112865
Exporting face mills to update libref  fails to update - creates new libref
7121536
6 E# p) D9 }' N+ W# ^If a block template name begins with a number, NX  issues a parse error
7127193
8 N4 l( L- p; f( zNX Thicken not removing Gashes
: [% L5 D5 p) D6 w3 f) G3 O7127252
Routing Electrical - No tangency created when creating  a branch path
7127258
Routing Electrical - Extensions at fixture ports can  cause RCP to be offset to e
7127261
Routing Electrical - Duplicate RCPs  can be created when connecting one spline pa
7127797
1 [  a/ B6 v* wSME  bridge curve UI dialog memory issue
7128731
Engage going opposite direction when comparing NX7554mp10  to NX9013
7131552
4 T6 d+ [9 c) [- R2 p  _, JExport CGM  or Save drawing CGM  data is creating large files
: p  s8 r( L0 m2 G/ [) `7132153
Fixed contour operation cut region tool collision  avoidance gives internal error
0 v, d, V* e: \$ ~  ^  X7135193
4 F+ Z( s& Y/ D0 ]; g; L8 D( EInternal error Subdividing a path that contains Slack..
7141930
Excel automation com  error code 80010100 creating part family
7149735
7 r0 d2 d7 n: M# YUpdate formboard will not save last update
$ d" D. P8 R& G; P, Q, a7151420
Unable to export PLXML  netlist
) t* y+ J  |1 a' y5 m/ `& n, `( d( B7151453
) T. t0 {$ U) T& n) r. WSIMPLIFY PART HAS UNEXPECTED RESULTS
& ]3 G# D+ J  l  s% t7153468
PDF Export of Drawing has extremely poor performance
( K$ B5 Y4 P6 x  T* _7155067
" S& i- x3 T2 ZNX: Part is showing "Missing Reference"  alert after interpart update
4 {# {, Y: s% N1 E7158156
Tool path lock remains locked in current version
7159379
Given object does not have the required csys  matrix to create angular dimension
7162788
9 R, |# A& D1 q- k# u7 E+ bNX 8.5:suspect geometry warning with no tool motion;  nx8.0.3 has tool motion
# k( i" P6 S2 b* @! W7162958
Raster image causes Internal Error when creating Part  Family member
3 p0 W& I2 E  B" H5 v( ^7166681
& t2 k0 `5 q0 i2 A  wReusable object created result in user defined expression  name lost
* |& ~, Q( A$ F& Q3 b: U0 m7166980
; I' x3 U! }( U) \+ mSmart Lightweight view performance issues
7170902
Import plmxml files into Electrical Connection Navigator  crashes NX.
7172711
8 G* @$ G, \% j- ^& P2 pProperties attribute column width is not maintained  if modified
# G. r% B% m' f8 d% e7172738
: r* x- _) J  mContour profile operations will not generate; operation  terminates
' V' p3 Q0 e: `5 P6 g. Z5 u( @, \7172867
JT_NX mismatch in component positions
7173718
Surface Finish symbol exported to JT is rotated
3 q' K) p& `9 X1 |7178300
( b9 y8 C% C3 ]; t' BNX 8.5.3.3 MP1 plot generation take an excessive amount  of time
1 K' ^  y1 I2 q, l7179210
( W" J9 _0 S4 Y7 i6 X/ N+ ^5 ]Editing a datum feature symbol creates unwanted Jog
' B1 r! l) o. i/ \, e7 V* q& [; Q7179278
NXMGR: Replacing assembly part family template with  member gives error
- H' D$ F3 S6 R. c7179528
Relations and Interpart link browser fails to show  linked curves
7179535
NC: Unable to open file in NX 8.5:null tag not allowed  after upgrade from NX 6
7181152
mp6 udf fails when changing udf scale from 2 to 1
7182280
4 m. |- |; t' T) `: W' Z( eNX 9 Routing Spline path conversion performance
7183415
% ?! I5 j+ a( CCreating a hole, sketch csys goes to last hole created.
7185242
DWG file in NX 9 is not maintaining layers - everything  is placed on layer 256
- ]5 e9 W& j. M  {9 Z7185561
. I  E6 P6 p" A* h7 gNX- Legacy material Library Issue - read error
7185734
No link status change after PI name change; can't  update
$ G9 H8 `+ w. @! V9 ~7186716
Datum CSYS reorient will not recognize arc center  point snapping
# I% X) G  X1 m* i! k7186912
HD3D pop-up for Analyze Pockets has incorrect spelling  - information
, T  a) |2 O3 r7187083
, K% n) @- o* q: L+ s3 h( iPMI - Section curves of Lightweight Section disappear  with the solid
7187490
Optimization & Sensitivity fields snap back to  their original size
  _3 S+ ?: H. Y4 j1 ^7187890
Scale value disappears with customized view label
7188549
KF FrameXY issue in ug_udfs in NX 9 versus NX 8
$ @' Y4 b6 M% q( C* ]4 r7188966
After using Adopt Existing Object, error creating  new part
- x- C% `; C! C8 k2 D7189340
6 \2 {7 h) X7 VElec Lock Length on a spline moves the component
% ~2 e& R! Y: R' ?( c" ~7189438
  U# d' M/ [! S+ M' UWELD ISSUE - Welds failed MDM Consistency check
7189444
WELD - CFF no longer lists previously Connected part  number
* r4 i' U2 s+ V$ M: L1 j0 p7189451
3 U1 I) i9 K+ K+ @# D: cUnable to select legacy welds to Export CSV
7190075
Mirror feature - unable to recreate feature owner  deemed the feature failed
7190132
# b  W1 W" X& j# f2 Y7 W# T" rCrosshatch Settings dialog is not closing (open directory)  handles
7190615
3 o* |8 {8 }9 x+ XUF_PART_reopen() does not post confirmation dialog
" t6 h! q* g& t$ |( c+ u7191032
" A# [% X8 \1 i1 F# z" B5 k+ d" ENX-View Updates in Drafting
, l6 z) t0 n3 {( R0 G& J& m7191225
6 m, ?+ j. Z, G! y) YIPW 'out of date' status is inconsistent
: T' O# b$ J, F7191819
! s! s/ s9 q3 @0 i# M* I+ dNX 6 Environment Variable
7 U) s) h. j/ S$ R/ N2 x; n  L7192308
, i+ p' U( S$ U6 _6 `* \, kRouting assemblies cycle through updates to features  of loaded part unexpectedly
. x) r$ }# z. q1 V  [7192332
9 Y* B& G0 ?( X6 b) I* m4 cPMI Custom Symbol leader arrowheads detached in JT  export
  i5 d: C* n  Y5 [. J4 f# Q# u% n' Q7192996
Save All should only save all showing in the preview  list
7194290
NX allows checkout of "out of date" subordinate  DE's
7194313
No Alert is issues if Weld Point is not on the top  or overlap sheet
/ c8 H6 V# g& b$ H7194316
9 \8 N- i( J. ~3 {5 v; s  n' pLinked Face created on the fly are not put on the  welding construction layer
7194335
Drawing Revision block (Tabular Note) updates position  in TCIN but not native NX
2 x1 L; D6 X# z4 Z7195365
1 C7 B: g' W; h+ c! R" f1 KPR7489819 Linkpmi fails to finish PR7195365 Use proto  tags to find underlying geometry
( ?: P2 R% k/ P4 n1 Y6 B7195452
6 T4 ~6 ?1 [/ Q% m1 Z4 ZLine Profile FCF applied to multiple curves in PMI  produces incorrect CMM tol
5 e; G  d8 ?# h" p! }7196000
Published Welds are removed when file is saved without  publish option checked
7196005
Welds re-publish to Teamcenter with new ItemID without  a change to NX weld
7196474
0 _. k2 u3 `5 C6 s9 v: f- _Log is displayed even after using UF_CLONE_set_logfile(NULL)
7197259
Lock length changes the Shape of subdivided spline  at the takeout point
9 o  g$ ]5 R9 \7199952
KF adoption different in NX 9 than NX 7.5
7200065
3 A. K/ m# H. Z& a1 F( o" NCannot create a single scan path XSECT pattern
4 ^7 h+ J% {' L% `7200157
Edit Parameters with Multiple Feature Selection forces  all Active Features
7200243
9 E3 ~# G8 s3 ^1 t# X1 nbatchShadeOptions crashes JVM the second time it is  used
# n+ A- i2 ~( v5 _9 k8 a4 F9 k7201310
3 t/ U) V% ?- i% j; UGetEvaluatedText throws "Second parameter is  invalid" NXException unexpectedly
7201418
. E4 ^; A- a/ Q7 _( gTORUS MINOR Diam shows 'Failed' in Measured Status  column but actually passes
7202422
' b. F0 t9 `  E6 S3 fPart file opens in NX 9.0.2.5 but not NX 9.0.3.4
7204075
Electrical Cable editing is excessively slow in NX  9 when slack is applied
2 a7 ~6 I" o3 J& h1 W9 H7204201
7 e" w0 ?& I! K; v+ {& @4 v, n. ~Adding slack to a cable in NX 9 takes WAY TOO LONG  compared to NX 8.5
7204218
Importing CGM into a Front view breaks apart the CGM  data
7204219
1 D" E2 f& C7 p9 Q6 p' N! Y( \8 DCreating a spline path the performance degrades after  selecting multiple points
& b& E) z# n" P" U+ q# x7204248
Top level assy structure is wrong after UF_UI_ask_open_part_filename
" i9 `1 r, w" P7204727
Selecting Named Centerline produces inconsistent results
7205173
Unable to delete reference object in layer created  by View Alignment
7206011
Added Wire EDM Tool - Verified the Path - Path can  not be edited...
7206025
; f7 j9 f9 W. |  D# q- S, a) _. v, s: ATrue shape customer defaults need honored, should  not be controlled by registry
2 ?  s4 J) Z/ {3 k5 y7206111
Customize button on the radial toolbar and it doesn't  stay after save user role
; Y0 Q! }- V* N7206387
4 V9 i" q! q. f( B5 pNX 6 to NX 9.0.3.4 MP1 Turning "Cut Region"  incorrect when regenerated
4 n& }( E1 e% a$ h) f' N7206451
- q; q! H6 x; V: r, J# `. O& bOpening a previous version of an assembly deletes  occurrences in TC
7206498
Search in NX Manager is displaying wrong results,  attribute is boolean
7206903
Export IGES and is missing sheet 2 and later, only  sheet 1 exports
" n: n$ P2 B# v3 z1 J! V1 V2 [3 [" u7207057
$ X, a/ I/ S$ {% fThread Milling Instances Lose Feature Geometry
1 O% y% A- H/ [9 |7 T, b7207275
UNLOAD_WIRE & LOAD_WIRE output
  u3 U  A/ \' r6 l7207276
Standard Part Management Drawing Issue
7208090
Syslog shows "Couldn't find object for"  errors for check-mate checkers
& M+ D2 `" f4 [! F8 _/ v7208817
) F, P/ A, X3 I! [$ g; sCorruption: Manufacturing part file cannot be opened  Null Tag reported
0 o6 Y9 Q2 ?+ y% E' H  `7208841
Creating Part Family members crashes-COM Error - 80010100
' F9 g% ~7 O9 Z1 `: M8 @7209357
' {5 e! Z/ t  U- h/ WWAVE Out of Date column has a Sys Delayed Link Out  of Date on Layer 1 and 27
7209392
! O* W1 d3 j& VMoving from NX 4 to NX 9, wave links are broken
/ G$ W2 i5 P8 V3 ~0 K3 i, m7209667
$ X8 W( P: G' ~! U% h4 VHidden sketch curves don't display when Editing a  Sketch
" _/ q/ b" t- S' L7209788
KF - different behavior in NX 9 than in NX 7.5
' }3 Z! K: z2 o0 g* c/ l0 V: l7210519
: f0 k$ E& c  M( B+ m: @Moving from NX 6 to NX 9 and output rotation in DPM  in NX 9 is wrong
7210780
Suppressed Drafting Objects Displayed in DWG Export  in NX 9
- q* p6 X; z6 Z+ @0 F, u7212173
Memory leak in NXOpen API involving annotation associatively  data
7212277
6 d9 P# |$ N+ o; f4 i& kEvaluateAnyAsString throws "Internal error: memory  access violation"
7212599
& V# E) J/ Z& v- ^# _+ F& MTool Axis specified as 'Vector' not maintained in  an MCS when re-entering dialog
: y- f0 f4 j4 }  g+ ]- L7213425
$ |8 X* M; z& @Linear dimension does not connect to Baseline
  [! J* A0 x5 h; [/ ]+ \7214318
Absolute function is ignoring the unit it has been  assigned
7217444
- r! u! p* h0 l3 q1 {$ B! {Existing Validation Results Summary (VRS) Is Not Updating
7217464
Differences between NX 8 versus NX 9 trim vector direction  location
7217705
/ e! A3 Y- v  {7 }+ W1 B' T  a. |NX Shape Search error with UGII_GENERATE_MULTI_CAD_JT=1
2 N/ P9 D1 Q. U' F9 d9 \' |* w7217767
NX takes a long time to accept the selected feature  that was picked
2 }/ k. e3 ~/ K1 t7218446
% m6 q- u; w6 ?# V0 j$ jPMI light weight section not update when rotated about  a point
( e$ g& O. D3 @4 r* N' k; o/ k# p7218517
UF_UI_ask_ribbon_vis & UF_UI_set_ribbon_vis don't  work for Groups
$ p& R$ T) f9 T2 R7219284
7 o5 Q) U4 F/ j% X7 T  ^( oUGMGR_Remote_cico Customer Default is ignored
7219549
5 O6 r! u# z* c* U: YNX: Flat Solid fails and Cleanup Utility does not  resolve
/ }. t: C+ T3 r" V. w  F' x7219655
Harness Un-Routes when running 'Part Cleanup' with  the "Clean Routing Objects"
7219749
- e( O, _8 Q# S- X  ~& ~0 k% M' LSpecification drawing fails to load due to 630035  null tag error
/ m, t( _8 Y: o: k3 i7219767
$ [4 s# ?3 E8 z: I5 l5 Y  @Electrode Design: Patterned components have suffixes  duplicate in BOM
5 N9 c+ Y( H" R7219944
Send UGMaster dataset from TC to NX result in modified  but no check-out state
% K8 `( B/ i" ?8 M. P3 s6 k7220673
WELD - CFF unable to select face
7221407
7 c" ]" A  T" [" V! P" d/ uElectrode Design - BOM issue
7222200
NX: export flat pattern does not keep layer settings  from preferences
7222326
) Q* |/ B/ H4 J) H0 cTrying to  place a component in Routing Electrical, OK not available
8 H* Q( `; n. R6 X3 n7222627
& l% E' R9 `9 D4 b5 ~mqc_drawing_askViewData does not return correct info  for label and scale on_off
  z1 A6 I# Z. S1 C7223654
# v0 @) Z& L$ D4 q3 ^3 r" q' }( M6 yIPW not updating, ONT column does not show IPWs as  out of date
$ F) i" y$ V$ f6 c3 q7224120
Deformable Part not functioning properly in NX 9.0.3.4  MP1
7 l1 |- S$ ]7 Z2 I1 D. C7225295
+ z% ]3 b, ^8 K5 W' QProgressive die wizard Collision check problem
7226331
AFEM update resulting in Internal Memory Access Error
* Z# ^, z% Z- p4 ^9 }# k) a7226332
Unable to delete certain features
- q- x5 k) {9 S7227078
Macro playback fails when menu has a nonselectable  separator line
# i' j9 d( D) b# c3 k+ f7227259
/ v+ \3 p% n# Q7 uNotes linked to IPE are not updating when parent files  in Excluded state in NX 8
  \, O. ?+ N0 W: e, I9 o7227981
Reposition Component (legacy) - wrong results when  using fractional input
% y6 e9 u3 \' E. V4 |3 F" e$ T! h6 t7227986
8 ]$ _" C+ S) U/ |$ WFile fails to open
7228118
' g# R2 d+ U* e7 a; S1 K( OParallel generating hangs NX
7228212
Manufacturing Assembly will not open in NX 9.0.3 but  does in NX 7.5.5
0 a! t$ |, T( o$ K7228330
PMI Custom Symbol translates to jt incorrectly
( @# O% x3 P' A- K/ Q3 N' x8 E7228885
4 Z0 Z& E" T. f+ n/ a! `1 g; QExport of a SE drawing using DXF_DWG into NX is poor    Line two  times in Runner,appear Internal Error
, d1 I4 t. X$ V! C" I) u; o" t; p7230663
Offset Face feature doesn't display ! in PNT when  needs attention
7231190
Importing a JT file stacks all imported solids on  top of each other
7231606
Internal memory error when creating face on mesh
7232084
THREAD MILLING - operations getting flagged as edited  when retrieved into NX 9.0
  B2 |. O; K8 l7232482
Not able to create XML output on a single part
* z: b! Q( v( Q- r9 a5 `2 C7232506
Excess Material is not taken over into XML Output  for straightbrake parts
7232686
Error adding exploded view to drawing
* w3 Q; ?& b/ c. f7233945
What is "Nose Angle" on Customer Defaults  controlling
% ^9 L# a' f. f. m& P% `3 F7 B7234393
& B! ^" g& B0 E& S& ^7 mDialog popping up Performance of almost all Manufacturing  features are very slow
, f3 u( P0 l& R, t7234476
; T% A: x8 [* qKF mqc functions for reporting template of family  instance report wrong value
7234532
  ^1 V# j  h6 a9 ^Plate preparation on Planar parts need to be at the  end of the feature tree
7234573
' H* [6 X, ~3 U9 g: a" u9 ZSmart flag isn't updated correctly
' T& z- I4 |* Q% b  b7234638
Plate preparation is not working on some Straightbrake  parts(Not making it flat)
  i& z: _2 A, L+ n& b7234648
Textblock Position in XML output is sometime not correct
7234953
CAM tool axis vector in MCS object not retaining after  edit
) B  y- N$ Y  Q1 c' x8 F/ M: q7235014
When the revision rules are changed variant rule is  deleted_cleared
7235599
Shiptools placing profile_plate returns Unable to  approximate guide string
2 B1 B3 w& L( Y. [7235637
3919 Extension does not save the effectivity set on  DCE
, B( B3 c& c9 n1 r6 D! ?7235745
Spline paths change significantly when they are converted  to the New NX 9.0 spl
7238319
Check-Mate results are not getting updated after upgrade  from NX 7.5 to NX 9.0
7238823
# U! g/ R& n; \$ F! K5 ~  o( @NX Edit Boundary NX 9 replacement is not compatible  to the NX 8
7239696
) l" c. j* X% Q: v) d' e/ r" E. qAccidentally selecting Inspection module locks user  out of CAM
7239705
6 S6 y" Q6 g0 [+ c0 D+ rCannot disable menu items in NX 9 using UF_MB_set_button_sensitivity
7240036
Mold Wizard - tooling motion simulation run the second  time fails
7240515
' y5 G6 W4 x5 L% rStartposition for Cutcom is not usable when NO Engage_Retract  is set
7240578
Auto Route in NX8.5 Electrical module fails to display  the assigned wire stock
7240702
  |$ ~% t* y* E6 ?( {9 _7 C' qCreation of detail view causes "unsuitable OM  object" error
7244999
9 x% V* B+ X$ g* O, [[medium] Teamcenter Naming Rule not used for PTS Parts
7245409
Symbol Font File is not loaded from Customer Defaults
% x; B5 P$ X8 Q7 F& v$ Q% S7245475
& l* u* I# r( ^$ HCylindrical dimension using baseline does not work
7245488
Not able to open part file in NX 9.0.3 -Plate preparation  - directions are coplanar
7245509
+ _! [. z6 C7 F' _7 ]% HPlate Preparation is not taken over the solid specified  by METAFORM_LAYER
7245561
$ o. b+ B4 Q: y; F9 Q) P3 j' WNull tag error when manufacturing XML output is created
% [# \' e  i8 [: \; q6 _$ i7245578
7 E- s+ k" {8 P2 L, [  AExcess Material not correctly placed on the planar  metaform solid
, K. }( T% V( S. p7246100
% M& |6 ?% Y' k) f- f# gUF_ASSEM_deform_part() fails with error code 580025
7 c9 ?8 S& Y* Z! [" j7246221
Question about Continuity
' i5 m3 b! W0 C- O7 C) s7246931
G2 Continuity is not updated correctly in 'Match Edge'  dialog
6 x( y; }% s1 G7247038
" L; y( L9 r( N7 F2 h; k4 |PR2221699 was not fixed in NX 9.0.3
7247370
+ d% U( H& K/ N; ?" d5 SThe vector of "Fixed Tool Axis" is not stored  in MCS dialog
7247430
2 U( q7 |8 h. h: D! D! _& B+ mAbout the spline editing by X-Form
7248034
( |. u, S# R4 p  y8 HJT part not visible in drawing after insert base view  (view from part)
* ^' g4 h3 Z3 `" v" {* `' u9 k7248110
5 X/ Q* _  M0 G7 h' _Thread Milling hangs when selecting each hole
7248301
Excess Material is not working on knuckled plates
1 b( w8 }3 x) v7248477
Move Object doesn't move associative text to specified  location
7248545
* Y/ `- \1 }; `  i, v- aCannot de-select run members to remove from run when  workset is displayed part
9 h) g0 [( F- i3 r" A: I1 h/ k7248586
2 s' [3 }; k* TIdentify command VKI Error Number 1 Function : vis_GroupSetEntFlag
, v; U0 {5 @+ \" C7248854
4 s! k6 O1 s/ Q% g% fOptimization setup gives a memory error
7248945
Electrode Drawing will not update to show the correct  attribute information
/ ~' o8 R  R1 E! h7 A7249382
/ }) _' ~4 C- M' X% zNX: Performance Issue with sketcher or drafting dimensioning
7250527
NX 9 does not write Relative Transformation Matrix  to TC10
! {- @/ M+ r; ~  X% ^! L# c3 k7250615
REG: Simple Pattern Feature of Groove fails to update  in NX 10
# ~( H2 x3 h$ v' d6 x& T& p7250649
& Q# e% F3 E8 A  u9 }$ h# e7 QQuery conic edge blend parameters
7250725
Editing a Surface Wrap recipe checks out two "nx_adv_fluid_mod"  licenses
& S7 e/ G% I7 E1 O; v" O7250904
. C  y# }2 h/ z% iUF_CLONE_perform_clone returns error code 720100
' y4 ?  @* r( \/ Q9 r7250914
Error happens while output shop doc during the tool  path verification
7251156
Create interpart link option is not remembered by  Routing Spline Path
& i  U# p- O) v+ R1 c0 K! I7251175
Modeler error opening a parasolid file
7251203
1 \1 P2 M1 d# @6 j" ACMM Inspection results do not match the results reports  from eM-Measure
7251305
" y3 E/ v0 m) v, j; Y. a  |" jNX 9 shows only 6 Error Estimates but NX 8 shows 7  Error Estimates
7251934
Feed Slowdown in Corners value is not output into  CL list in NX903MP2.
7252286
Moldwizard cut pockets change color when component  is moved
1 G0 l  u5 Z3 o) s7252306
LocalStorage not supported in NX9 internal browser
7252381
( s3 T* M$ l" d# g7 {Can't delete leader line
) t: n; J/ Y: ?9 q* e, E  ^# s7252915
( @* v" `) l: d: l! I8 H6 P) ITo specify the boundary for CAM operation NX 9.0.3mp2  takes more time
7253005
9 Q2 P- T2 m+ x4 z" dTabularnote with "Evaluate Cell as Formula"  -> no calculated value in DWG export
9 L4 j# o! I# @, B; }- e3 q: _7253230
Imported mesh does not conform to CAD geometry after  morphing
+ b& l+ k0 j' P# `( t1 i! n( P7253881
MeshName property does not set mesh name
' o8 u) ]( z$ i4 ]% J% w7254351
Bead Weld ignores Construction Layer Preference
9 l3 j7 q, X4 |, N0 x* k7254452
3 E; i- K  r, o$ M) {: mFlowcut-User defined cut order shows cut regions on  part before it was mirrored
7254620
: U& r8 `: a) I  \Unable to add Base View in Drawing -> Error: There  are no curves in the boundary
7254631
  d  P* x% x. ^8 f+ t* Z* g: [Empty Predefined View list if MW Assembly Drawing  template doesn't contain note
7254771
3 y1 h9 ^4 K2 `8 M* d2 H/ @3 c* p5 KNX Part Family Assemblies fail in TcVis
7254795
4 u5 i% V+ t' n% R# Z( B7 aWrong View Orientation using Electrode Drawing Template
7254883
USER WARNING MESSAGE 2070 (MTRXIN)
7255393
Force load applied as a spatial distribution is incorrect...
7256378
File in use by another process error occurs while  saving JT data
+ s! ?5 b- n3 g! t- B7256749
Rules Based Structure Welding Callback Requires Weld  Assistant License
7256758
PatternFeature with boolean operation gives memory  error when asking for bodies
7259032
Internal error when trying to open a drawing
' y/ |  @- g+ K# b/ f7259085
8 d3 ]2 R. m% @. Q6 O! O# s: `Tool holder and IPW Collision in Cavity mill operation
7259542
NX returns an Internal Error when opening a drawing  if the ugmaster is open
9 O/ q( J: I/ X/ E7259639
Element Modify Order does not work fine for the mesh  made in the body with MMC
7259764
Wrong thickness of Belts
7259871
$ b: U+ U5 G% J/ a% d9 GSave As dialog does not function when Item_id and  item_revision_id are mapped
7260083
3 V3 M0 v# q6 R" p, _3 QFlow cut operation does not generate Toolpath with  the stepover value specified
1 s( c; ?8 Q: T$ S; }/ C+ X4 V6 A7260263
$ T3 ]5 @; w& T5 ^0 Mug_extract_curve needs info on UpdateAtTimestamp parameter
7260419
Offset in Face cannot create correct output
7260939
Customer Default "Teamcenter Ship Name Format"  not working with Naming Rule
7261591
Order of commands of View Shortcut Menu is changed  when restart the NX
! |- o6 y4 E2 k, A+ g( U' e9 g5 X6 K7261643
  d0 s& [6 c- V4 G* H' {$ DMulti-CAD assemblies are opening as modified and being  modified by update
7261964
PDW Tooling Motion Simulation Mounted does not get  reset
7263544
3 |( ]0 h. A0 y6 H6 J4 U  i" SElectrode Wizard Drawing template All Views have a  wrong orientation
+ }, O; a9 _2 N7264204
No response from native NX Shape Search
7266198
& c) O+ d; M' u: {; D+ ^! b8 u3 jTable field - Spatial map: surface gives wrong result  with meter units
0 _: v% I# ?( @  [% v0 ^$ e7267123
NX: Unable to open part in NX 9 - Error during Update
# z9 i# p, G/ m, O# [7 c$ q7268516
" ~4 F) y+ y- B/ h2 b: r/ kComponent color change has no effect on sketch curves
6 Z- k( j& c1 Y- C% R7268524
" h6 R) `% L, o5 p; ^9 y( vChangeover Management doesn't change to second part  when creating drawing
) ?/ `! r; k$ F" ], t5 r- L' }7268811
No locked tool path when opening a NX 8.5 holemill  operation in NX 9.0.3mp3
- H# D$ D( R& I. R' x7269620
Cannot directly open parasolid file in NX 10
7269692
" p. g% K( U; kSquare cut not working using Stiffener by support
) g+ r" Z6 p% [$ v0 w6 `7271613
* Y+ L2 |% E! r+ x3 |& h! LEdit Spline Path results in Modeler error: coincident  control or spline points
7272054
) Y6 Z4 P- T1 S9 |MEMORY_ERROR
  Q! L7 z, P2 @' L6 h+ P6 K& o7272544
Cavity Mill Corner Slowdown not working
& ~  z) r& u4 J1 B6 Y7273528
Spline Path creation in NX 9.0.3MP3 does not have  parallel constraint
) J* D( c$ W( M  W8 B9 ~' w7273881
UFKf askListCount throws exception for an empty list
- E- T+ f- o, z% \- {, q7274038
Freebody result on cross-section of rectangular tube  of solid elements is wrong
9 h$ C7 n! W6 M7274837
Interpart expression not being picked up causing component  incorrect orientation
% f* f! a! `6 r0 q7275351
$ ^! m# K) d) `, a" n5 @Can not change the width of the column of "XY  Function Editor"
7275902
Enable Multiple Revisions and Load Interpart Data(all  levels) cause failure
7 f" r3 J# B3 U& a# A4 ^7276241
'Extend at edges' in Flow cut reference tool generates  unexpected path
9 {4 W# }. u8 q- s4 J7276455
) x0 R( S& t/ X3 U% b; ZQuestions about setup NX 10 Doc server
* b9 R9 S9 J' \8 l  P' ~- W% c6 S7276469
Can't edit appended text in text fields on Gwif for  PMI dimensions
7277144
Legacy splines converted to NX 9 and perform transform  path results in broken spl
! V( N; U, E' a8 Q7277922
# D1 M% T# [2 Q8 |! cUF_UI_select_with_single_dialog() displays garbled  Japanese characters
7 Y+ d' ?1 F8 y9 f% R7278186
Analyze Formability odd Shape of Curves
/ e4 _/ ^% y% g7 T- U+ a7279064
0 V: _' b+ P  t+ |UF_UI_select_with_class_dialog() displays garbled  Japanese characters
7280728
& t, c, F' B* hPromote body with View Section command
7281152
# @  @* i+ t: q2 O; v# CNX 9 cam turning tools rotating in visualize to the  proper orientation angle (OA)
, Y0 q! Y+ ]1 r7281186
Corner slowdown feed rates not being retained
- ~9 v5 Y# \9 }7283638
/ Z' _4 b8 u$ v" w3 t1 L2 VAngular dimension is switching to incorrect value  after performing edit
7283852
AssertErrorCode reports asserted error code rather  than the one which was thrown
( e$ E7 N+ Y8 c% X+ N7285267
" j" f/ t  S6 w, \, m5 D. \5 jTool path gouged the part in the combination of the  bull-nose and Floor Wall
7285563
% W" j' r# k: E/ @- kTextblock text still not correct placed with XML output
7285581
View Break problems with ShipBuilding Annotation
7287051
Object supplied is of the wrong type using partial  loading
0 e7 E6 ]- N  R- U* @% |% h7288299
Lost customization when choosing "Save Role"
7288817
Tag Error reported after deleting Blank geometry in  a Floor Wall operation
+ \1 F; ^8 |" u4 Y7289348
( U$ @% Y* c" K6 q8 X; z2 R' FThe symbol converted into DXF is not correctly displayed
P291752
. c" X: a/ K( e; HNXOpen GetBendParameters() fails on Blend with Bead  with active Unbend feature
7292256
- Q2 U% c: L, x% b. _+ WNX 10 Hole Table has 2 Through Holes rather than 1  C'bore hole
0 G7 J7 Q1 z, r) H7297361
Transform linear path in NX 9 breaks the connected  splines fixed constraint
7303696
% I# y  o3 W+ k& Y" Q& r  ^, OError drill
+ u* N7 q& q7 F' K7304633
9 u+ y) y1 W- o' @: m2 }Reverse direction does not work in spline path
7306094
Defect of "Suppress Hole" during 2D mesh  Edit
9 g6 ]! \9 Y5 Y7306506
Lowest Save Z should be 3mm _ 0.1 inch for all hole  machining operations
, ^* g) D" E- r( ^& K7307005
GRIP truncates object names at 31 characters
) r9 B" e' P( f9 }2 f7307943
ELEC - Update_Delete has gone thru too many Iterations  Error
7309871
) j  y" T# q( N6 j, I& \& }0 j% }2 ^. eSurface finish symbols do not migrate correctly from  Ideas to NX
# D" y6 k" Z4 l& N- H" m* L# Y7311168
- F$ O2 W/ K6 @% C8 N. `Export DXF option does not export the groups with  geometric entities
% I# ]5 R8 i' D8 D7311266
Excel does not close after "Cancel" in NX_Part  Families dialog
1 v3 O8 @' j; D, ~! O! h7312187
( [' W9 h: M! a# j4 A5 k0 yBuilt in Path does not move with deformable routing  harnessTODO:VIS
7314924
Routing Electrical Auto-Route Speed Issue
7317562
Internal memory access violation in Mold Wizard Check  Regions
7320011
[CAD] NX_JT facet cannot fill out to Column of Comment  in Part Navigator
7321443
1 p; I+ }4 t) i& s2 t0 R. `NX routing hangs & freezes
- P% t6 S- p7 t" }7321459
Issues with 2D Exchange
7322223
& E+ z( {, S1 E( L! r# ZWhen cloning the Motion object, an error occurs
9 x  G( f2 {6 \1 u7 R: l7323208
Tool neck is not taken into account in Gouge Check
7323671
5 y1 e3 e6 y0 V" \) |Replace stock command does not work for replacing  overstocks
7323850
Flow operation fails to find all cut areas when ref.  tool is a button cutter
7324151
* w7 {9 N8 K4 XCoordinate Plane Label, create Height Specification  of an Air Duct_Cable Tray
7 m( d2 G& L+ ~# u, ^8 c7324783
5 N3 k( R& U6 X4 p. k3 b5 SLeader location of the labels having no text changes  on view update
7324967
Post Builder does not store_lose canned cycles settings
2 h8 W5 {) p3 o9 p6 ^1 e6 X! K7325314
3 c0 i- W$ Z5 IUnexpected route line appears after deleting an elbow  component
) V# c& l1 v/ N/ E# R8 [' U7326604
4 p: _+ i; B. H+ N" ]Deform Part Shows both deform and undeformed body
7327280
PMI with custom symbol is WRONG on the jt model when  viewed with TcVis
: k8 r$ Q2 I6 W) X4 G9 V$ n4 V3 F7 G7328032
% L: O1 m8 ?6 o2 bPatch tool inconsistent in Mold Wizard
7 ~" Q/ R% o# d* t' ^7328486
& O8 Y2 \4 @1 {5 b" o/ w+ W" L. jGenerated Java code has some spelling errors
. F% e& C2 K0 w/ i/ x& S7328655
Can't see the tool path from a defined goto point  in the machine control
9 V3 N( g. w  p2 u6 X7 K$ K7329681
Can't enter appended text with environment variable  set
* g' a& w7 j  O1 t, I: W7330441
! m$ q& Q. Q, ^, hKF ug_odbc_recordsetOpen() fails subsequently after  re-opening part
7331569
About zero inner diameter for BEAM sections
: b" U' W( c( _+ J# D  a7331743
Letter of view label is changed unintentionally in  Stepped Section Line
7331836
0 E0 L8 h$ N. A7 B& G2 m; S/ Y+ lProblem selecting component face with ID-Sybol _ Balloon  in section view
7334954
Opening NX 7.5 CAM part file and regenerating in NX  9 produce 3 times extra output
7335606
$ i0 F6 |5 |  z( z4 C# _! HTranslucency of the blank geometry is changed automatically
3 z) p  D: ?9 R' G1 m7336750
& t. N- i- @) i" FZlevel fails to generate
7338346
3 I( A6 s6 L, P' `Commands of "Graphics Window Manager" dialog  cannot get recorded
0 Z' M7 P- m4 l7339437
Symbols in Hole callout dimension appear bold
4 ^% u& v, w( a& l0 ]7340006
8 E# y* m( h; ?/ t3 @/ wDimensions and annotations go retained when out of  date NX 7.5 drawing is updated in NX 9. The problem occurs when a boolean  operation is performed. This is a regression introduced by the fix for  PR 2184195 in NX 8.5 and NX 8 MR
+ A9 [+ d- A' |, A5 B7340087
- }+ B' C7 K( H# jIn NX 9, disappear component model in the view
4 Y5 w" T8 Q, n$ A, U' T7340136
[View Update] flip extension line gap
7340173
; i; r8 a$ p7 C" Y4 eLeader location of the labels having no text changes  on view update
5 B% H/ d$ F4 H" Z# X7341153
1 M, C8 ?" y' `. l& N1 ^9 SUpdate Part Modules icon unavailable.
7343227
Symbolic Threads in Promoted Bodies are visible in  PMI Lightweight Section View
7343657
) r7 d: \- n; `Translucency - preference setting problem in Manufacturing   
7345967
Values on dialog are incorrect when editing MAD
0 s3 [# P) m5 q/ a7347546
& C6 I! k' J2 B) oMissing bending information in XML output
7347671
" l3 C; L: Z/ O: ~  E, L" ~Search Reuse Library can't work when place Electrical  Part with Logical Type
7347820
; |$ h5 v: [$ K2 P  J; b, KTurning tool rotates on FROM point
4 T. L0 u" R: m" a+ ~- x7348049
SimpleUDO Example Code will not work properly
7348637
Refer to PR#7348637
7350916
Material change in Modeling has no effect in Adv.  Simulation
- u. n5 |. m# ]* b+ X5 T/ r8 I7350950
SH_MASTER_PART_NAME in title block disappears when  flat pattern view is placed
7351827
& ?8 ~% q" M2 E/ T' T1 F# y7 SParts List needs to be updated twice to correct callout  order
7352603
: ?5 K9 \; Q# p7 E7 U, RSheet Metal - UAF: SM Solid Punch: Could not thicken  the sheet tool body
; M" }8 F- j( [! w7353538
NX: UF_ROUTE_find_path not finding path when component  is not on RCP
# {+ e& {9 @$ K& A0 j/ N6 B7354585
9 p. \7 @$ o  P% W: \Selection NX Assembly Component in an NX Assembly  Model as an NX CAM Geometry
5 ~2 b. M+ _- l1 T: C, x" j8 [7355284
% ^7 z2 l% h  F+ z. d: ~. A4 ~4 JProfile cutout in angle to target gives wrong cutouts
  s) G; R; n, r5 R1 B* \! B. ]7355564
6 Q+ O. O+ F/ `5 t9 I' t* yAssembly containing deformed part always opens as  modified
/ f* d0 t$ K& K* S+ B6 f2 y7355778
* f7 u7 Y2 h7 [# b( ]7 {Fixed contour cut region dialog does not retain overlap  region setting
7356726
The SM01 & SM02 cannot be opened & internal  error-memory access violation
4 U7 [# L2 n6 B0 w- |  t. T7357253
Dimensions suppressed and should not be, when broken  view is created
+ G/ s# |. c1 M7358110
Problem selecting component face with Quick Pick section  view
; m- W( N% e0 A, i+ [  p7358297
NX Search fails to find items with Display Rules
+ h2 C+ ]; N3 U  u' q0 A7359169
# I5 ^1 F7 m' O) {, F2 g  t5 \Curve on Surface result seems incorrect
7362888
NX 10: Supported DXF_DWG versions : 'version unknown'  in logfile
. |' I6 N: d8 x7366386
Cycle time incorrect for drilling operations due to  non cut units = ipm
7367322
7 ^  A( A* F: v2 S7 U% C8 vContour Area operation failed
7367434
Surface finish symbol migrates incorrectly
2 A+ e3 o/ o( j, M$ ^" Q7367650
% [" l! b- j) I! [% ]* N) D+ p  ]. MNX questions
2 S% _0 A7 G# B1 @7 t- n0 f, B7368418
Obscurity with Boringtools
5 U$ _9 g9 x! Q# M7 L7368520
0 \* S3 n4 r1 T) BThe problem where Adopting a dimension to KF in NX  managed mode fails is fixed
) X. T8 X) o. i+ S, @: Y7368810
Expression linked to attribute breaks on Save As to  new revision in TC env
7368871
0 Q$ |0 J1 l' E" }9 G5 d. M' W' P/ F5 HNXMGR: Getting error saving files to new revision
7369360
" K$ Q; n* T# YScCollector > GetObjects takes a very long time  to return tangent faces
7370182
+ c' Y, v+ ^/ l/ QBase string specified name rule no found in part name  is not displayed in NX 10
3 D4 v4 L1 S1 ]2 \7370717
; `  b2 k" [  d, d  CTracking point issue with grooving 3d tool
7370960
Ship design structure reporting double volume in TC  mass properties form
4 x5 C' M: Y% w7 @/ }7371557
Event MOM_part_attributes missing in CSE simulation
4 c* s8 f% R; |! x" d; q) N7371833
Thread Mill post output changes in different versions
7372191
Postbuilder - right click on word in block cause "Forced"  white bar to disappear
7372509
Reference Text Attribute does not update after a Save  -As in NXmanager
5 e/ n0 x9 C! t, V7372523
Delay Geometry, Expressions, and PMI Update cannot  be resolved
' ?3 T) M: j+ Y& Q' m) r) }& G7372731
Part cannot be closed with 'An illegal file was given  to the tag system' error
. K2 H5 H4 N# r. a2 u3 w  I7376506
Unable to save an NX 9 post in postbuilder NX 10.0.1  mp1
7376627
7 t9 }- A4 s2 L6 \+ J4 g) k4 cPart Attributes that are synchronized are not updated  using Edit Stock operation
7376769
% [2 k% j3 p* f; U5 M% C/ Wxml out not working on part with chosen textheight  for markinglines
" o6 |$ L- d# p5 R- ^+ P6 A- O: f7376871
5 ?1 X$ n" O* }( q7 a1 ]& XUnable to Create Surface Weld on Face
7377508
Pre NX 9 saved namred references in Teacenter as
7377944
It fixes following issues 1. PR#7377944 Input list  for refile with Dataset CLINames is not working as -part option 2. ugmanger_refile  not honoring user specified load options 3.Native refile doesn't have  -help switch
7379136
4 J2 P7 U; k8 [& WThe problem where the datasetname for PDF export can  be changed if it contains a colon or slash is fixed
7 L1 o) |) y2 m& u: K+ f6 B7379509
NC: Internal error when updating views
8 o9 A+ ]7 `  K8 Z' V# M1 _7380212
File -> Print to PDF, first page prints OK, second  page fails - v9.0.3 SPECIFIC
7380721
CAM Toolpath "arallelGenerate" don't delete  temporary Datasets in TC
7380792
Pattern feature on UDF gives incorrect results
7381332
. }( `; N4 _8 Z& e# ]Texts are lost when translating to dxf (UGI_GROUP_EXPORT=BLOCK)
7381714
NX 10 MACH ISSUE CUTTING REST MACHINING CONTAINMENT
7382137
0 r0 x* t3 N* H, N! c6 gUDF with rectangular slots gives alerts after insertion
7382199
# b3 d; \" d3 R; B9 O4 kTire Envelope command creates incorrect geometry
7382213
File -> Print fails every second time with Internal  error in NX 9.0.3.4 MP6
  Y3 S* Q/ @* H' x. ~$ _- f7383182
" r$ Y" f* P$ oPrinting Problems with a 2 sheet drawing
7384035
5 ^! a3 c9 h; }' INeed to disable View Tool Bar in NX 9.0.3.4
& g; H, H  q$ O9 F6 M/ d- s% k7384414
VASC, engage_ retract swing angle not working for  Against Part_Check
7384816
Specify point block is not honoring snap point enabled  property
7384847
Internal Error
% P& |$ X- r, B7385572
Expression value will not update with delay part module  update on
, @8 |8 _/ ^8 r4 [7385619
NXMGR: Multiplying quantity of NX assembly components.
7385674
) v0 K: g+ b0 }8 x+ c1 p4 ZMemory access violation while trying to print in drafting  mode
- }3 E+ H3 {: Y+ v9 Z8 t/ @7385894
6 E! U+ Q; E# g- x- aArea milling create the unnecessary toolpath between  the cut area
. d* U, w4 L  Z3 u3 l. B7387531
Internal error trying to edit or regenerate a lathe  operation
7387729
Deviation gauge impacts performance during edit of  geometry
5 n) y1 Y5 |  F* Q& E7388095
' Y  f5 w* M- Y* ?" iFile -> Print is returning an Internal Error on  second File -> Print execution
+ @2 A. h; N; y4 N% c7388900
About display the full list of item types in the New  dialog
; J6 n1 s7 U3 ^' C- s. a  k  Y" F7389230
Normal vector of the plane in which the line lies  not correct for LINE feature
7389532
; v1 ?% z1 e% U  x6 x  VNX 9 part will not open gets a Modeler error: Coincident  control or spline points
7389778
+ y+ d5 l, K. Y0 g5 BMoldwizard sub-assy not updating to the INTER-PART  expressions
7390013
NC data is not output with Batch Process with Background  mode
7392030
NX 9.0.3.4 MP6 can not print more then one or two  drawings
7392113
2 l6 u$ c+ p% N7 D/ eDimension value changes when opened in later NX version
- I, `' C. p$ W# o& n7392151
% L- e( v) W9 z/ L2 s  ]The overstock or stock function when using stock as  component creates a new component but does not honor the seed file.
! j+ S/ N# S7 g* i; s& T7392623
Leader location of the labels having no text changes  on view update
5 M3 o1 Q  E1 k7393312
/ s! L5 M5 N& C, Y) H! dCustom symbol leader arrow heads change orientation  in TcVis for VDG 2.
7395405
+ e9 Y; P7 O/ r) ]/ dA changed Path Display Colors will not remain for  Mill User Defined operations
0 l- c* z  k0 ~! C2 ^7395408
Displayable Name in Teamcenter Navigator in NX - Display  additional attributes
( c4 R8 E7 h& `; s  R7395622
Unable to create Hole callout dimension on a threaded  hole
7 p5 E. e' O% `/ E7395844
mqc_askDimensions() function returns two tags for  a single dimension in drafting
7396007
: n+ l& k& n* Y+ R6 `8 m/ k& yAnnotations of deleted bodies not marked in drafting
9 W) Y( |2 s: K5 m7396080
( d% I* D8 o- ?. ~+ OParser (Python) error received calling OGE05 subprogram  with comments
0 G6 F8 I. ^2 i+ u7396264
7 n6 s5 D* O/ H2 _9 P% h1 ^: mGetting an Internal Error when selecting a Hole Making  operation in the ONT
6 O8 @% |, @% ^0 t7396748
1 y* |, D5 m) |) F3 ISeparate Feature for Each Body option fails "Make  Position Independent"
) `! u$ d, T! r, H; K9 N7396828
9 t+ S5 ~: Q% B  j1 fNX351172: UPDATE_DELETE has gone through too many  iterations, pattern of UDF
6 f7 D: e5 W7 X3 }/ V7 a7397031
  n- [9 c3 q0 W+ A6 u" u( p& t7 u, nUnable to open part NX 9 MP5Modeler error: coincident  control or spline points
) p, Q, _2 ?# v% X6 J: E7397240
The problem where the datasetname for PDF export can  be changed if it contains a colon or slash is fixed.
7397281
7 x+ G! F5 J" K) q- OCannot use environment variable for MW_Wizard_View_Manager  XML file
& q: t6 J. b' v$ c; `& D7397357
' ?) _* W! T5 _- V  C$ M3 `NX: bad size for allocation request in storage manager   
7397818
Floor Wall operation not generate profile if two front  faces on same side
+ ~1 u% L, f0 P. i, o6 l7397826
" ?, R. w- x% x! o- aCannot save post in PB 10.0.1 MP2; corrupts post
7397960
PartSymbolFolderCollection does not work as expected
7398128
How to set not to copy UGPART when "Save As"  is executed in TCNX.
: D5 \. T: k$ \7398159
. m  l6 R6 l! _" T& Q) RProblema con la funzione Print (internal error_crash  when printing twice)
7398344
Printing problem
& \0 _" H1 r7 V- o# y7398600
Unable to display "Text to Line Gap" option  if set "Text above Stub"
7398751
7 e, J% ?: I8 m: WIn PDW Measure distance tool not working after strip  layout process
7398903
, i: M9 U% K6 m+ vCAM Setup has not been stored inside History (because  using gives Internal Error
3 k9 L; @- r7 R6 R0 ~7399045
Weld Assistant does not honor Feature Sets
2 ?* _; b1 ?2 ~/ m/ X7399195
An invalid tag was passed to the tag module
7399631
Post Builder post reports errors when selecting G  Code tab
* [; M9 b9 s4 H2 T/ m5 @7399914
: z. V' b8 Q7 O3 o" h" LNX freezes when we execute "View Update"
7399920
3 H% U: S5 K$ |4 u, B' wUnable to delete view
7400098
The customized command icon does not appear when restart  NX
! D( x5 S1 g$ j9 o' W: D7400183
Unable to create TIFF file in NX10 from nxplot.exe
7400254
Tilt Angle is not applied when generating the tool  path from MB3 or BatchProcess
4 x" i3 \9 k- X' r8 Q1 o; t/ a: _7400388
* _" I- c2 W) q+ E. |Error "Invalid geometry attached to operation"  for Wire EDM operation
7 M" m8 P1 f, _' q( l7400505
$ A* l- q4 x' DFile -> Print fails every second time with Internal  error in NX 9.0.3.4 MP6
7400622
Transfer method ignored with floor stock
7400742
& G5 m8 j3 Q+ Z% ]5 z; eComparison Expression variables not assignable using  Okuma Parser
7401527
' D8 O2 ^9 m/ T7 xFailures with interpart expression in NX10, worked  in NX 8.5
4 V* g& Q7 W  f3 g7401549
+ P9 A& r; `8 F4 L' N& G& ZUnable to export JT file, when I have added a radial  PMI to a hole-feature
0 v  i+ [$ _% V* k- J! a, j! i7401873
4 g2 o3 T5 u2 Q  `Convert Mating condition doesn't work: "Object  supplied is of the wrong type"
7402243
NX 9 Post Builder dropping custom UDE reference
2 Y7 }* u7 \) V- k) v7402494
: q: {1 z7 v: F/ v9 R- zPartSymbolFolderBuilder method getPartSymbols throws  InvalidCastException
4 [; P" E0 F* S" _: u% ^5 p7403036
1 b& _% n$ h9 d1 WThe display result of 'View Section' is not consistent
+ q# K& |6 }* d) K. V/ O/ t( q7403504
) K+ Y+ K) p* i# ^7 X& pPoint selection order determines associatively in  Teach Mode Operation
7403552
Refresh Before Each Path when de-selected still refreshes  the path
7404291
The node label can't be corrected
! L; o7 f# r  M+ C+ Z7404604
Assembly components with occurrence type "MEConsumed"  are not displayed in NX
7404634
$ n) l8 a& N. I7 Q+ v& GPTS Copy template as new design does not transfer  classification to new item
7405841
Cannot change selected body in concept from spreadsheet
* X* y7 R' ^( M/ G7407057
+ c7 e6 b* Y* @2 ?# KNX 10.0.1 Post Configurator  post cannot be used in NX 8.5.3 as advertised
4 y  g0 c$ w. X5 S6 M- {4 e7407411
; L/ ]" L  z6 |" V2 kParts fail to Open using NX 8.5.3 MP9 after attempting  to run refile
7407434
Defpart naming is wrong after update
7407552
Neat trim fails to trim when angle is too large
7 f: M7 P+ e! Q# E9 z7408111
" |) r# `& W2 tmill_tool_change UDE does not pass variables to Post  Builder
& I9 u2 |2 Z) ^3 N  Q* ?. ^7409177
* E7 `5 @: L- Q  u8 @6 Z2 W" D/ QReplace Component resulted in not loading object attributes
0 C& F5 l/ H$ ?$ @2 Z5 K; K7409329
! U3 }: U+ q4 U* w1 wWCS is moving to MCS when cam object is edited(MCS  or Operation)
# i5 t" d% }. _6 o" F7410068
+ F3 {+ B/ ~$ h, g/ DUnreliable toolpath hole mill operation with temporary  geometry
' y9 n: m& H/ D! a/ o7410142
# W. y, }0 C9 t" GError at a choice «Fanuc» or«Heidenhain» in NX postprocessor
7410245
3 z) I. c0 z" `. L/ V0 F. Z; lDeleted (-77) shows up in "Show Out of Date Objects"
6 s' S: U5 I. @8 O* x7411220
: |8 V( k+ L+ uRouting: wrong engagement value in mm-inch couple  part-assembly
7411333
% r* h: t  V* p! k+ P5 l, S' t9 ACUTCOM creates additional Circle which returns in  a full Circle Move Simulation
7 U  v. K5 E- L4 ?& C# b7411917
Deleted or Invalid Class ID error on sim file export
7412011
Unable to revise part family member in excel, if original  part already existed
9 {& r* [8 ~: H& f3 b7412848
. h, K) g: t5 t( CUnable to Create Surface Weld on Face
, J7 ~: z/ u* B/ {4 {7413284
Getting "Tool Holder Clearance must be greater  than or equal to zero"
7413303
Performance problem when loading assemblies
2 y* s- G  p% ?0 N: l/ D8 ^7413532
' K' |: I$ C* vUpdating part modules updates out of date features  multiple times
7413692
NC assistant misses a face with Levels option
( L; [3 a2 ~' N( o7413716
9 B8 j+ U+ J7 q* Q4 P- `Material properties related help statements refer  to incorrect system attribute
  _$ H$ I4 D4 j/ W, _& I7413734
Editing a custom electrode blank component terminates  NX 9 session
7414817
$ K0 w* r& Q, H7 o/ ~7 r& IUF_SF_locate_material() cannot get material tag from  2D mesh
% f" C0 L4 a9 Q6 a7414899
NXOpen GetBendParameters() returns weird bend angle  value of 1145915 as of NX 9
7415877
Measure Bodies causing NULL tag error when measure  certain assembly
7416422
Wrong behave of Attributes (ENG OK but GER not OK)
. O5 t3 l# W/ N' R7417089
1 R% a/ M2 z  ^: i4 W2 ]5 gCreate 0D Elements -- Incorrectly changes all Mesh  Associated Data
7417439
  }1 t; n2 X; l4 ~+ i5 C[CAD] The twisted shape is created by the "Tire  Envelope"
7417550
  v, ]- [# {7 f+ ?Mirror electrode fails to clone blank part from TC  in NX managed mode
7417597
/ `2 e- O/ m  o" w! a9 J! l) oNX hangs when the operation name which has 128 characters  is copied and pasted
7417645
Gallery name is displayed incorrectly
7417650
Some icons are not shown when restart NX if using  a customized mtx
* F% v1 R! A& _. w8 B; e$ [1 ]7417795
Incorrect rotary axis movement for Fanuc G91
7417994
- S# R0 {% o2 U3 i7 O. z1 eMesh update slower in NX 9 and NX 10.0.1 compared  to NX 8
  J, c% L4 @( X7418280
Attributes do not update in Part Family members after  modification
7418501
2 n/ r' L# p+ ]* `$ g' u: s% \: B6 B% VViewers don't see assembly level color with NX managed  data
4 U7 k+ j- m. C7418523
NX ShapeSearch fails for Body with UGII_GENERATE_MULTI_CAD_JT  set
$ x7 _/ [6 C2 \- [$ r0 ]7418531
NX: Info.WeldInfo object LogMessage outputting inaccurate  message
7419493
" |6 l. _" H" l+ i! h# b$ {# nA part which has Linked Compoiste Curve created beore  NX751, and has source parts completely unloaded, may show curves in wrong  position after Part Import
$ y& P9 n1 Q8 Y) a8 k7419790
Subops in Generic Motion templates are limited to  a certain amount
7419848
Zlevel profile operation violates the part geometry
7420183
4 r  Y% ]' [( }3 {1 yUnable to keep sorted result after output spreadsheet  by customized BOM template
: L3 F4 i5 \0 g! t' {7420240
Inconsistent result when changing spline path length  on a new\existing part
7420328
& r. G1 M4 ^/ x9 t1 Y* EInternal error occurs while opening NX drafting part
* E) C$ A( f" K- k7420433
, N6 K3 P! Z. L4 T1 ?Add additional column "last modifying user"  in open part file dialog in NX
7420440
Teamcenter Navigator in NX - custom attributes are  shown with real name
! J: j# J: D$ X1 e; z2 j7420442
8 p1 c  v0 ^! T$ Y: ~3 Z2 t; c9 DMW Drawing inherits Symbol Text Font from Defaults  with own Drafting Standard
7420858
Tool holder collides with part geometry in floor wall  operation
7421004
2 S# y; U8 _3 j) |2 t9 o; pReduce Ordinate Dimension origin label size, changes  to default editing dimension
+ t& W+ V" b2 C, q: m: S& _7421361
Linear Counts on cutter path increased from 75 to  547
7421708
3 d5 x8 N+ N3 _" g" UGetTaggedObjectVector & GetSelectedObjects does  not returns selected object
. }* J! n4 A6 G& j7 i4 P7422218
Prefix_Suffix location from shipbuilding dimensions  will be switched
, ?1 Q) J1 I1 j5 y6 H7422566
Copying a Tool in NX causes the tool to disappear  from TC View display
7422712
Getting large Initial Move from out in space at absolute  CSYS zero
7422960
* c+ T5 q% n0 B+ D' HCopy and paste of a feature can't be done
7423221
9 ^6 `* S% ]! V! j+ {Existing attribute does not allow to edit the value
8 }- p1 \! g0 |7423310
Cannot select the Coincident Curve of Face blend
9 z3 r& \- f9 r" d% E1 v* ]7423766
6 I3 g; U/ X/ i1 Y$ ?1 uBug in tcin_cam_template_setup.bat - tries tcin_cam_template_setup.bat.bat
7423882
6 U0 r# u2 n' ?: J- P5 ?Pre-NX6 group resize Grow_Shrink -> None (please  backport PR 7393956)
7425246
Overstock not processing Reference Characteristics
9 ~' B0 g  D1 s8 j: ]5 @! p7425507
GDT symbol gets tilted during edit and export to DXF/DWG.
4 v2 ?- ]! h" y7 d' L8 z7426049
8 ~9 q1 l+ |2 L  Y! `9 ^) wRegression problem: File works in NX 6 but cannot  open in NX 8.5
7427065
6 O' j4 w& x, H7 I# q+ fOperation does not generate because of "Internal  error"
* B5 }: S; K# I4 W5 C5 d7427225
The display of assembly parts for grooving tools with  an tool tip junction at a different corner then the first was wrong
% n, S4 A. |9 e" S# {7427386
4 x& Y; B5 O: k0 M' v9 TSave As New Item Type with different Rev ID as assigned  is not possible
7427456
) ?& W. S; E# f( z( W+ NRepeated use of UF_PARAM_CLRPLANE_USAGE makes NX crash
7427544
$ E5 @# x$ ^6 R  c5 ^. @Node drag is not working in NX 10
7427641
/ l# i' F3 i) j* Z6 VDXF converter is not reading options from the dxfdwg.def
7428456
( ?/ n5 Q& ?; `9 ~: [- Q. e+ Q2 \  ePart Family Member part is modified message after  post placement of gasket
& i+ g: m: r' N& R7428706
9 c4 h, P7 O, jAssembly constraints not immediately displayed when  placing routing part
7428719
8 @1 K& \9 l- S2 XRouting Reuse Search dialog does not show values for  search criteria
7428739
" p; @& `: k# A4 a5 x% Z$ L, Q$ \5 ARename non-master by saveAs New Item in NX is no longer  possible
7429441
ExportAfu() cannot export correct magnitude and phase  values in external mode
' Q- k% D& H' Q$ b, S0 V7429662
- o# s- |5 }5 f4 wOpening part family dialog is takes more time compare  to earlier version of NX 10
7429756
. s5 |3 A9 W2 V/ D, Y; s8 l* fInternal error occurs when point dialog icon on "Select  Object" block is pushed
0 U( z; a. [- [" Q8 q7430627
Feed and Speed -> Failure while generating Toolpath
7431105
' ^) v$ q- E' ]9 @: s- [6 GThe problem where NX STEP AP203 and AP214 translator  products are not exporting and importing Nested External References files  is fixed
7431329
+ N0 L5 K' [) }# U# YDelete core pin causes part model linked body in core  file to be deleted
7431439
7 V8 w% V4 e% g" E6 h" t2 nOld Alt Rep component replaced in SM BOM continues  to load when sent to NX
$ l- ~9 v4 N8 f. z5 i5 g  K7431930
& I% D" s0 G* k) |0 z0 ^+ D/ tThe user cannot select point & snap point on point  dialog in drafting view
7432001
[CAD] By specifying the "Lock to View" can  not control the helper line
7432003
2 B- J: Y. v" w2 O/ P: i% V1 _Clearance handles are not shown when selecting curves  with zero clearance
& _1 P' Y, g% ^2 G5 }9 I  ~+ p7432113
File open performance is worse in NX 10.0.1_TC10.1  than NX 8.5.3_TC9.1
7432166
Auto Weld Symbol not working in
- Q; P. l; n0 @3 W. d/ V) v. s7432774
Reversed offset direction in mirror feature
. o( j# ]7 b( A8 @8 Y5 q7432928
Search object By Name fails with internal error
% u8 ^0 q+ C' i) n! x; w- ]7432988
The problem where the template region overflow logic  should play role only when contents from different regions overlap each  other (this is mentioned in TDoc) and not when the content of high priority  region crosses over the boundary of low priority without crossing/overlapping  the content in low priority region is fixed.
* j+ F2 |, _  E" k0 ~7433907
Unable to save as Specification drawing when Save  as new item
- B1 e* G. j, f7434233
+ t0 x. ]6 J) ]  N0 H. f: p( lLayer changes when export to dxdwg
7434936
NX Crash on AskEdgeFeats call on specific assembly  drawing
) ]- }% E, l" Z/ m8 a' ~7435201
* G. p; B, w! |6 H3 cThe problem where the customer cannot save their Routing  assembly due to stock descriptor characteristics (i.e. DB_PART_NO) being  applied is fixed
7435507
$ y, x3 k0 Y% PWhile moving assembly file,it throw error "arts  in this session may be corrupt
7435528
( q8 r0 r4 H8 Z0 ~Start SpreadSheet of PartFamily in NX 10 takes more  time compared to earlier version
9 V! `$ Q, Y/ f8 w+ w6 G7435547
Closing part family dialog takes more time compared  to earlier versions of NX 10
0 g+ m) o" V3 F# H/ w7435658
  a( Z/ p+ P: TOpening part family dialog is takes more time compare  to earlier version of NX 10
7435666
While add component and loading in NX 10 takes more  time compared to earlier version
1 A8 W5 N* p3 F8 i4 J7436198
: N, P) z' Z3 G) `) _Centermark does not shows correct position after changing  the hole position.
7436385
MKE does not accept special characters in UDE Label
7436438
3 Q. J  s) O3 D4 n$ PDifferent numbers of curve if Edit parameter or edit  with rollback is selected
7437460
/ _6 ?( o7 s- C6 j* S" _Batch Process only calculates the last operation selected  on ONT
- G' w( g  g2 G) f) T) }% P7437576
UF_MODL_export_udf() is limited to 13 parameters
2 g+ E; u2 ~  X$ P2 R7437744
6 o8 D' a5 H9 l6 z7 f0 a( }Custom cycle GROUP is always open, even though DEFVAL  is "start_closed"
7438056
Invalid Filename while open parts with NX 10 because  of desc part name style
7438229
1 b9 H. L, y9 r) @- eHide Business Object rules in BMIDE cause item to  not display or searchable NX
* I/ O8 U7 U' G! M: a7438787
CAM: Can not delete some Milling Operation
7439067
4 n2 K9 o1 M. u. M, B% t7 a, xMW Standard Part cannot create geometry expression  link from different parts
! m; ~" F' T2 n3 O" n9 Q7439169
% H- L' C4 G. t; G& g& w6 O" wEdit arrowhead in mixed state to Closed Solid Arrow  fails
# J5 S/ p& G' y" v% U3 h0 u3 u7439339
Part cleanup generates retained 2D centerlines
' w" A% X- Y" e+ B( |& Y7439411
Cavity Mill Profile gouges Part
7439445
NX: The specified expression variable does not exist
7439794
Attempting to delete category 'ALL' corrupts session
7440155
[CAD]"Make unique" command cannot control  the copy behavior of Direct Model
7440262
NX hangs and crashes Fatal error
7440282
Save part family in spreadsheet takes more time in  NX 10 compared to earlier version
6 o+ A; D2 K0 m7440284
3 t8 A( g0 Z( v5 _$ K7 qMW Standard Part position on plane incorrect depending  on point selection method
& h$ Y, R9 w/ T' ^& n2 A4 |7 ^7440387
Design part not replacing the seed part when creating  a MENC file using File-New
- E4 F5 H3 x$ |; E7440419
! y" M5 t; @! s9 C: mWrong dimension values in Ordinate Dimension
: \* O5 f+ q" ~7440684
Channel 1 and 2 swap places when opening sync manager
. `& l7 N( }1 b2 S4 x- a7440762
8 q9 e! M; S, e8 aCannot Weld Pipe to Pipe with Hot Fix
  h% f+ n5 j2 z; @. N& x/ U  G. Q' [* }7440907
* U$ D8 e8 y4 R3 R7 P; T$ LGeneral Packaging - Windshield Vision Zones &  Wiper Zones not correct
4 F7 k, b( m, Y! _6 ]( {7441308
! s7 q2 s4 k+ J) L4 y5 d& `7 K0 C9 xAfter part cleanup if you save the work par then an  error occurs (Attempt to save bad pointer, save aborted)
7441821
1 U3 T, G" W* f) ]& @, REdit Attributes in NX shows two non-editable fields  for Value in German UI
" D% M) q" d; ~+ p- H7442102
Cannot get values of interpart expression references  in NX 10 anymore
9 L* S* ]1 }  h2 \2 f8 W8 J7442175
+ L/ r0 e* ?: t% e! ]Drawing shows out of date (!) in header unable to  update
5 X& g& X+ D5 M8 S9 A/ ^: M7442375
# `+ o. }! Y/ A  E8 iUnable to save to a new rev. via part family
9 R2 U8 G. H7 m/ @9 \+ Q4 L1 w& K7442664
Overlap Distance is not inherited from the template  part. in Area Milling
7442666
Tool path at the steep area is not connected correctly  with Z level ZigZag
' G9 D: r/ {9 ]9 U7442928
- v4 b9 h" ~' q8 c: sThe total resistance value of the solver input data  is zero
! C* d1 @0 s7 k7443347
Loading a specific role when starting NX is not working
7444361
Not possible to save Assembly as Altrep
1 k" J3 o, K7 U; J  f3 @+ s7445049
Edit Line Segment - Detach Active Control Point changes  pipe angle
7446190
3 \7 T+ Y, P% }+ V; W; PError XML out in NATIVE SHIP DESIGN APP NX 9.0
7446738
Cannot open the FEM file
7446913
2 n6 \5 C* a: ]8 [A problem that does not open the OP2 file of MSC Nastran
9 |4 k1 r# ?# E: o7447052
! F3 h+ I8 f9 r! U* k; u. Y0 d9 lError XML out Ship application.
: ~! |6 z4 o0 w# ]% \! Q# }$ D7447661
* n, i- \- n9 F! A.NET remoting  no longer works with an external server process
  b# P: L. ^# y1 T7447946
6 `5 J7 G& `; T$ y& u% `% p, P( wGetting an "Internal error" when pressing  "All other Parameters" icon
7448083
NX 10 with TC takes a huge time to open the dialog  of "part family"
% H6 j# c0 [9 }; z1 `" ?+ G$ }7448089
Start Spreadsheet of Part Family in NX10+TC takes  more time compared to earlier
8 V- c& a! o1 Y! [: G8 d3 O7448096
NX10+TC takes huge time to save "Spreadsheet  of Part Family" compared to earlier
7448104
1 j! t" D. [7 K! x4 {' `- yClosing Part Family dialog in NX 10+TC take more time  compared to earlier version
- l7 D- p+ B' O7448108
# J* ?/ I! _& ]' [! E/ i' r/ T1 nWhile add component and loading in NX10+TC takes more  time compared to earlier
7448143
Selecting elements based on polygon geometry using  related elements does not work
7448145
# a( W! l6 F+ [9 nComponent status not returning properly
7448270
Machining Knowledge feature teaching and angular dims  of conical surfaces
) @2 k+ }7 q- l: M5 ]7448382
PDW - Initialize Project - Internal error: memory  access violation
7449784
6 ?3 {2 P/ O- j8 oNX 10 fails to load Parts having expressions
7449991
/ F. Q1 ^! v' Q* E, VMW: New project drawing does not show images in the   titleblock  in NX 9
7450283
- p$ K7 x7 T6 U9 g$ F$ MPolygon Edge cannot select once it fails in "Stitch"
7450423
" H( M& V2 o& f9 E  q, IUnable to de-select the Pole by "Shift key +  select Pole" in X-Form operation
* e" A/ C( d2 ]# _7450599
3 Z4 Y0 D0 M: N/ g! m, M* v1 _Missing Home Button in NX10 Web Browser
7450940
CAM Batch Process is executing only the last operation
7451146
# w8 Y- W) |! A5 `4 }. `* wFile > Close: illegal file given to tag system  due to exploded view in drafting
* p" x' G3 e6 j4 R$ K  d7452545
# T1 }& X, g2 `7 C! r3 TAuto Part Size, Diameters
7452717
Shortest Tool stopped working after upgrading from  MP2 to MP7
7452858
! E4 W3 v. U  ^) xPost error on cycles if tool does not fit in hole
! w$ [1 \4 b9 B( Z/ n4 x# U7453664
. l4 G3 u  k% V' x) L) v6 A" MThe problem where NX crashes after exporting jt from  external application is fixed
( L5 D  l8 u5 ?7 O( q# i. o7454195
Assembly raises Update Event Viewer when opened in  NX 10
' u6 Y2 s0 |# l$ c1 L+ ~7454752
NX 10 cannot open files from Teamcenter when User  has log on name with Umlauts
0 v/ n; M  }8 V, V5 b4 G7454784
6 p0 X2 v/ l' d6 }; e$ s[CAD] When saving a UDF in TCNX, an error is displayed
* e/ T8 U- Y  K: X7455488
" D: M, I% w5 L* ]2 p3 wGeneral Fault Exception when trying to divide cut  regions
7455564
Wrong excess material in Analyze
& d9 M# V, h0 N$ Y9 x+ w/ u* [. c7455796
, b- D2 s" y1 U( x# i" j* n9 JGRIP EDTEXT causes "Stack Overflow" and  terminates NX 10
7455899
Tooling Manufacturing Geometry doesn't maintain Face  Rule setting
7456072
% M+ j# T, M' q; F2 tTooling Manufacturing Geometry UI hangs up and NX  needs to be terminated
7456166
Problem where STEP file containing locale characters  was not importing correctly is fixed
7457681
. x, v6 U7 d  f# [+ \+ [File size has increased 10 fold (7385237)
; B! V( }# B* C9 s- @3 g7458015
8 F8 h; |6 t0 e: v* \8 R) \$ J# lUnable to create hpgl file through nxplot.exe command  line in NX 10.0.2
7458337
Internal error: memory access violation (11) while  opening assembly file
) j$ D/ S( g, P* y) W" s7458745
5 Q! Z! e, _) o: r  Z7 s( x& CTire Envelope Wizard yields a sheet body which cannot  be used in modeling operat
7458765
Routing:Null pointer supplied to Routing
3 w) _- K, T9 n9 O- a. j# Q* f" J7459058
9 J( L* E* y# }! j  WFitCurveBuilder - problem extending both Start and  End
. ?8 j6 c: J; l% V' p. s( k7459212
; f* p0 J$ F! l. M& g. jFollow Predrill Points are incorrect in Cavity Mill
5 Z9 M; |' Y$ F/ X" o- D7459258
Stop At Intersection does not work correctly in provided  case
7460164
Macro playback with long part file name fails with  IE or terminates NX
# ^. h' y# P2 R: O. C8 U3 A# j7460165
% Q( i. ]+ m3 o4 yFBM: Calculation of ThreadLength attribute is wrong  in NX 10.0.2.6
# Y- m5 x  T1 o9 G7460678
Can not open the assembly file
7 w4 U6 ]3 W4 I0 k# ~$ ]7 G7460903
6 Y; |' z' U: L4 k5 ]Invalid part tag - Error occurred in editing a Reusable  Component
0 s! G9 T0 a  J5 r' b9 K. D' l3 _+ z7460914
Input is not a valid parameter when changing font  size in table note
  \' G2 \1 ]5 K. d9 n7461011
DecalBuilder.SetImageFromPart causes An illegal file  was given to the tag system
7461153
9 `, H6 L, d8 W. F2 V; i+ L' QError "Invalid File Name" when loading Parts  with referencing InterPartExpr
7461207
3 C5 g4 ]# u4 uFBM_HOLE_MAKING: 'COUNTER SINKING' does not support  5-PAR. MILL with Tip Angle
7461299
FBM_HOLE_MAKING: 'HOLE_CHAMFER_MILLING' does not support  5-PAR. MILL
1 J; d( z9 R2 X' D7461734
Marking parts as modified
7461929
5 t  T7 @1 J) ]Part and IPW in Intersection Strategy does not work  correctly
7462429
Overlapping columns in the HTML file created by Export  to Browser command
! y9 E& i: {2 b6 G) r7463185
Start and End reversed after adding End Cut(Flared  2-Side) to BUP Stiffener
7463255
Select an object to edit the leader "Internal  error" occurs
7463269
3 r9 B6 f2 t* B. w& X- Q3 KIn special case, Operation Runner function appear  error, and can't work
7463342
Internal error when try to create Joint Mark in 4GD  mode
7463501
Structural Welding cannot generate Weld Preparation  on ends of a Profile
9 ~: k8 ^+ D2 T/ k7463992
Same issue as PR 7340087 - component disappears in  model
7464051
; d3 F' w1 Q3 J3 \6 m9 F4 gNX 10 post does not output correct UDE cutter compensation  register value
6 K  H8 r- ?1 \0 w; d; R7464410
) K9 j  E# `* [- t) R$ Y6 GThe feeds&speeds and machine control are missing  in the planar milling operations
) c% w- G- A4 u3 X3 }6 g5 m7464751
Countersinking does not work with Standard (Twist)  drilling-Tool
7464972
# }& H9 k, y6 ]/ @) F' z2 TWhen a grooving tool is remounted on a pocket on a  turet it is positioned wrong
7465928
PMI Cylindrical Dimensions have incorrect extension  lines
7466062
Internal error when change Depth per Cut
7466193
Wrong NX 10 attribute dialog when using the German  user interface
7466281
Weld Publishing of Pipe Welds Doesn't Work with Our  Latest Hot Fixes
7466597
NX: GRIP EDTEXT causes "Stack Overflow"  and terminates NX 10
7467273
' M/ S3 s! w2 M; O4 O# UThe display of assembly parts for grooving tools with  an tool tip junction at a different corner then the first was wrong
7467425
: v1 [9 S0 _* VNX 10 hangs when using "Body(s) Without Assigned  Material" and a promoted body
7467555
( N% [9 \, U. [1 ONeutral Factor Value in unfolded view with SB Convert  To Sheet Metal problem
7468391
: H  G+ A& o3 }& B9 aFailed mapping units in information window when you  import materials
, G$ ^0 j( q2 n, P7469125
Coolant Flow defined within "DEEP_HOLE_DRILLING"  is not printed to CLS"
7469153
There is no "Depth Increments" in Deep drilling  with chip breakage Cycle
/ _9 v+ |" z) i6 y# p" L( z7469161
" ?2 y- j. w2 f9 j2 t# \Dwell at Starting Point is not outputted into CLSF  in DEEP_HOLE_DRILLING
1 J3 o* H/ z6 }! P; @7469163
Datum feature symbol is not created correctly on FCF  having stub length zero
+ r: q# |/ O$ E2 b- S2 C& D7469284
! O, v5 A5 `0 |Internal error: memory access violation error occurs  while opening part file
& U  b5 Q( {: `7469432
GRIP EDTEXT causes "Stack Overflow" and  terminates NX 10
. I0 R+ ~7 n$ q% X, K( i( r. Z7469599
Light on polygon body issue in assyfem context
6 ^0 z* d; L; X9 P6 d3 K! d4 ~! `7469700
Object Type wrong if ASM will be load by "partial  loading"
9 G2 A) k. _. ~5 T. A7469857
Error with "point to Face" 1D connect: a  tag was passed belonging to an object
7470336
' G; F- ]7 G7 n. EOld tool path not removed from graphical view when  generating from oper dialog
7470464
9 K4 p7 ^8 D. `" j* UUnknown region is displayed in the graphics window  when you create a FEM
7470623
$ V8 T' ~9 m5 ^& m- M9 |8 BDialog for Partattributes corrupt in German NX 10.0.2.6.  Version
9 c' b4 ~& y4 e0 X7470757
+ ~% |' r( i, h! Y% F5 h8 hUnable to open Drawing File with "Null tag not  allowed" error
5 V  y" s, J* W7471437
Edit Angular dimension requires re-defining it where  Settings does not
7471779
! |( k. Q6 _- ~8 _. GMemory Access Violation while open a UGMASTER partfile
7471816
8 o% M( `9 D  Z6 PMemory Access Violation during view update
9 P" }; Y1 H/ t$ K6 R& Q. m+ |7472467
! d, `$ h5 y% o, {* CTool Paths are not refreshed when the operation is  regenerated
" B/ W# `" @/ C, _+ A+ a7472594
  l3 q4 c4 L+ O' m% E  P# _Samples machines posts sim01 thru sim09 won't open  in Postbuilder
4 X; o% s, N/ ^" G7 }3 Z9 w7473258
; r, q  p) p3 a* d  w$ zGeneral Relinker description incorrect
; _4 S: b, b1 S* P7473423
Cycle Force display strange in post builder 10.0.2
: u7 Y- Z7 |! {3 `, {  l7474064
( [% y7 e" K' j3 `" ?" l9 ]- iThe specific dimensions has become a cause that causes  an error when "art clean
2 m1 f7 M% c7 Y2 I6 Z. \# E7 @) _5 b' A7475859
5 N0 S# F& A0 a8 T8 w1 JInvalid Filename error when fully loading components
7476349
* Z  [3 H, \& F) a* P8 TOperation not refreshing old tool path when re-generating
7476697
( A( g7 ^1 R6 r9 ]4 p7 rWrong value is imported in <(kgf)(mm)(kgf-s^2_mm)>  unit system
7476719
0 `; n1 F4 [; H7 {6 tEX: GRIP EDTEXT causes "Stack Overflow"  and terminates NX 10
3 X& B  Z  g4 p# f7 Y3 `7478090
  L3 s" l% a. E  PLeader location of the labels having no text changes  on view update
, a! b  V" S1 ]2 G# q' A7478092
7 w% N- S/ X8 J  i& EAttributes dialog contains 2 unusable input fields  for value+wert in German UI
! W- O; B/ n; h3 r+ v) m7478292
Edit Plate Thicken option from two sided to symmetric  doesn't work properly
4 q5 C" A( ^5 V% ~! A8 K& ~5 T7479313
0 {. R8 u/ ^5 ~& nGetting wrong part name
) g5 ?: S/ ^" `3 Q! q$ c7479634
. M5 e" w6 M* i% T" ANX freezes when defining constraints during add component
7480074
Display button does not refresh image files
; H) X. w" `3 [, Z& j: y7480118
A Documentation operation can be assigned a tool for  reference purposes, but does not contribute to motion in the tool path,  so the operation should be ignored when judging for a tool change.
( v; m3 `5 a# N) M) s* c7480165
% M% Z: G% n3 M8 S! t) p, Z- UMOM variable mom_tool_number does not update
7481066
NX MCD crash _ unexpected behavior with objects created  by source
7481463
% Q8 {& i% q* w; ~Unable to design an insert using Parent part type  as "Owning Parent"
7482641
"roblem description:
1) When Item objects are classified in the  classification tree, we do not load them properly into the NX session  via the Routing re-use library
0 u; X9 _2 E6 u+ n1 \$ H9 v4 u3 j5 `2) When a classification hierarchy is defined  with intermediate nodes as type StorageClass (instead of abstract), we  do not find the start nodes properly during our search
Problem solution:
$ [( S/ W, O* u( `2 h$ g- a1) For Item objects, set the TEMP_PART_SPEC  correctly in the charx data for the individual member rows so that we  know that we have to look up the specific revision based on the current  revision rules when we go to load the part into NX
* w! |* O' I  q9 Y) F+ [2) Traverse the classification of the hierarchy,  including StorageClass nodes, to find the starting nodes for the Routing  re-use library tree.  We  actually reversed the search order and no longer due a depth first search,  find the Classificaiton node with the specific identifier and make sure  that node lives under the passed in start node.  This  is much more efficient and does not require searching the entire classification  tree."
% p3 y: P$ q/ ?! C, a- i' n7483079
Unable to open part files with "Attempt to free  already freed object" error
1 g2 \; M6 ?0 D: Y4 A7483306
UF_cs2_constraint_type entity error in checkmate
7484543
2 I/ l, X; P) W5 n* v/ O* E  z' p, kTooling Stock Size shows wrong dimensions with existing  pattern feature in part
7485037
NX 10 does not recognize template parts in TC11
! x( v4 i' Z! C2 q% x/ x7485152
Create a box function changed in NX 10
7485419
CLSF Export Bug When Exporting Multiple Toolpaths  in a Project Group
0 h: s, h9 m. |: C' [( A8 q7486816
The tool path API support for Helix motions was incomplete  and had a couple of issues that needed to be addressed
7488773
) L" @2 k( n4 z. IInternal error caused when saving part file
6 @+ x" a: X' `/ @: ]6 c% C3 L7490630
) Q9 h' F7 ?: f4 ?# |, e1 zFlat pattern bend radii callout does not maintain  units
* q) w% i" J6 a8 f( \" m3 u7492187
These issues are EB related issues and solves the  LWSV cases
7492862
& p# z3 m& K9 P+ C# M! dWhen moving some sliders on the legacy Standard Part  Management dialog box, the labels are being truncated
: [& W8 o) |: U8 X* i, A- M2 o9 J. Q4 N7495362
When User do MB3 on drafting sheet and perform Part  Clean up NX outputs "An operation was attempted on an invalid or  unsuitable OM object"
7498845
The problem where the datasetname for PDF export can  be changed if it contains a colon or slash is fixed
7499949
The display of assembly parts for grooving tools with  an tool tip junction at a different corner then the first was wrong
7500262
An error occurs when deleting an operation
7500467
Progressive Die Wizard Collision checking is not accurate.  When running the Collosion Check on the provided Transfer Die, the whole  upper die is highlighted as a collision when in fact it should be a few  components
5 i8 f9 E) d, ?3 G2 x) Z7501997
NX 10 Macro recording of Base View creation fails  playback due to UG_APP_PMI
7502032
; Y2 ?7 a( A* o- J( q$ r+ A: ~/ \1. Create Mulitple IPEs using wrong names
2. Lists not being converted in inch parts
7502899
Bolt circle dimension changes when scaling a view  on a drawing
2 V% v7 @: i; i# {. w7503419
Problem description:
1) When Item objects are classified in the  classification tree, we do not load them properly into the NX session  via the Routing re-use library
2) When a classification hierarchy is defined  with intermediate nodes as type StorageClass (instead of abstract), we  do not find the start nodes properly during our search
Problem solution:
, k; ^$ W" E) A( y% k1) For Item objects, set the TEMP_PART_SPEC  correctly in the charx data for the individual member rows so that we  know that we have to look up the specific revision based on the current  revision rules when we go to load the part into NX
' K3 A- p% I- H2) Traverse the classification of the hierarchy,  including StorageClass nodes, to find the starting nodes for the Routing  re-use library tree.  We  actually reversed the search order and no londer due a depth first search,  find the Classificaiton node with the specific identifier and make sure  that node lives under the passed in start node.  This  is much more efficient and does not require searching the entire classification  tree."
, `6 p# `$ m( g' t2 Y) L7503642
The problem where the boundary geometry of Profile  moves of Teach Mode operations is on a wrong plane is fixed
0 y' _+ R3 x. W& N7503938
( {& ~8 W+ v8 o( i) E% m! I+ p0 o5 S) ~Problem was originally fixed in NX 10.0.3 but the  change had to be backported to NX 10.0.2MP. There was a new version token  added for the MP fix. That token needs to be reused in NX 10.0.3 so that  parts created in NX 10.0.2MP don't regress in NX 10.0.3
8 N6 Y- {6 j. v4 L! F& x4 s% |7506539
"roblem description:
1) When Item objects are classified in the  classification tree, we do not load them properly into the NX session  via the Routing re-use library
2) When a classification hierarchy is defined  with intermediate nodes as type StorageClass (instead of abstract), we  do not find the start nodes properly during our search
Problem solution:
4 w1 {0 ~* G' Y2 J4 b1) For Item objects, set the TEMP_PART_SPEC  correctly in the charx data for the individual member rows so that we  know that we have to look up the specific revision based on the current  revision rules when we go to load the part into NX
2) Traverse the classification of the hierarchy,  including StorageClass nodes, to find the starting nodes for the Routing  re-use library tree.  We  actually reversed the search order and no londer due a depth first search,  find the Classificaiton node with the specific identifier and make sure  that node lives under the passed in start node.  This  is much more efficient and does not require searching the entire classification  tree."
7507514
Modl ValidateAndProcessLabel() does not allow @ chars
1 }1 a& M. d1 G; |6 B7509711
9 I% ^: {. d7 T. [1. Create Mulitple IPEs using wrong names
' ?: o! o. @0 |* _& b2. Lists not being converted in inch parts
: u3 T+ \- r9 n. T. V" x9 ?7511380
GM Users do not want to see the wave link warning  message when using the Create Single Feature option in the Weld Point  Wizard
% R! z  A8 n* U! I7 y7514048
; I+ m, m% ^) s8 S: M% C# s! b: d- wThe problem where the datasetname for PDF export can  be changed if it contains a colon or slash is fixed
7514341
- T. E: h/ {' D5 g3 ^- t7 `5 MWhen sending workset to NX from TC 4GD Content Explorer  the revRule is not processed correctly. This problem is fixed by this  CP
7515446
/ W3 E9 w) u2 XThe problem where the datasetname for PDF export can  be changed if it contains a colon or slash is fixed
7516969
Re-manage ug owned tiles when un-managing NXOpen UIStyler  dialogs. In this specific case, the customer launches a UIStyler dialog  from a user exit in the File-New dialog (Teamcenter). The dialog launches  but when the user exits the dialog, the previous (modal) file-new dialog  is not remanaged.  NX is left in a modal state and must kill it.
9 v% L+ v9 n  R  x; s7520120
3 z, R$ b. R- F"This CP fixes as issue related to MergeStock  command. This problem was discovered in EB part (at the moment EB is more  concerned with totally different issue related to pipe split) as well  as NX 11 beta test.
" F5 N8 L, U) o7 S- P$ u1 u* gSince EB will go to NX10.0.3, the fix is being submitted  to NX 10.0.3 delta.
7520120: Sometimes stock may have empty identifier  attribute.  Since  MergeStock command performs strict attribute check, it fails to merge  stocks if one stock has empty attribute and the other one does not have  the attribute. In reality empty string attribute is not really a valid  attribute and it should not prevent stock merge. This CP ignores empty  string characteristics during stock merge."
7520490
Bug on stress results on volume elements with orthotropic  material
$ C' k( L- x) ~( w2 R6 t7521073
) G1 L5 h1 l+ |5 x( x; X- M( R* B/ G" u"Clone of NX376402 to Routing_nx10mr_delta
$ ~9 h+ [% m' @7 Y- b! N8 a7 {ATK wants the bend radius design rule to ignore suppressed  stocks.
$ o9 G; |- Q( vI'm backporting this fix to 10.0.3 because Nathan  (ATK) told Mandar during the beta test event in Milford that ATK is thinking  about going to 10.0.3."
7529760
% ~& Q# Z' f( ]"This CP fixes as issue related to MergeStock  command. This problem was discovered in EB part (at the moment EB is more  concerned with totally different issue related to pipe split) as well  as NX11 beta test.
Since EB will go to NX.10.0.3, the fix is being submitted  to NX 10.0.3 delta.
# f5 S) r5 G3 L4 |0 I7520120:
) {7 g: g0 F8 u# _0 N* _% S& n! jSometimes  stock may have empty identifier attribute.  Since  MergeStock command performs strict attribute check, it fails to merge  stocks if one stock has empty attribute and the other one does not have  the attribute. In reality empty string attribute is not really a valid  attribute and it should not prevent stock merge. This CP ignores empty  string characteristics during stock merge."
% p. B% x& J9 J/ p! h- ~7530542
% n9 K0 a) r8 a* C( }The display of assembly parts for grooving tools with  an tool tip junction at a different corner then the first was wrong
7533163
Part not initialized
0 I8 M; T4 |4 X) |8250013
Teach Mode - Cut pattern changes
3 k7 Z: o4 @: N6 b: W) ^8250187
4 t7 x6 `! A4 C7 y. nOpening Replica Assembly -Error " Attempted function  idsm_distributed_app @site
2 b/ s  W$ f* q: F) ~8250222
& O9 y4 i/ B% y2 A* u3 z& p8 ACurve Length fails
8250244
NXOpen doesn't return contained features of Pattern  and Mirror instances
8250484
; z* O1 `" J- p$ H: I; ~4 NEncountered Null pointer attempt to convert MultiLevel  Flex mating conditions
8250508
0 L: {8 z( m6 C7 d. ]" ePMI LightWeight Section View doesn't move section  entities to other layer
1 |) C$ O. W  W2 l) d1 i$ a8250513
# t# Z# G6 Q, S& RFile > Save fails with the message: BVR is not  checked out
8250570
Performance issue to convert Wiring cable V1 to V2  specific Locked Length Spline
: p& v, c% ^; E) a3 L; R" @8250633
Blend Corner fails
8250957
Reuse library symbol in drawing title block is not  translated to DXF_DWG format
, h1 S" o9 D, v6 O8251000
$ _7 U6 Y' v# w, mNX Measure Point - Show Dimension display incorrect  values
: B" _# }0 _9 b8251033
Top Selection Priority in quick pick changed
8251149
Global Shaping updates to error since MP2
8251168
Adding an NX 6 UDF does not work anymore with NX9:  cannot paste sketch
$ ~) Z& s) p5 ^8251179
In the old part family template if we add any new  member at last row, the last row was getting replaced with existing member  at first row
! Y$ g( a* A2 d8 Y9 u" [8251385
- K  v, P" _) n* h; Y) s, Y4 ~" IStandard parts created does not get recognized by  Cutting Side
8251440
2D Exchange translator doesn't handle file errors
8251510
Note -> Insert Object Attribute doesn't list any  drawing sheet attributes
8251644
# r: d& u% t3 O0 X7 P6 NLaw extension - merge faces results in gap
; K, }& g$ g% k+ d+ \1 \. `; q5 n8251660
JT - Name of NX-Facet-Body is not converted
* ~: [, B& U$ A# V& Q$ @8251785
Unable to update views on drawing
8251844
Law Extension - merge Face if Possible - not update  Stable
8251875
8 X- R3 Z' \6 `, g. KWeld symbol edit failed
8251932
Große Dateien beim CGM-Exportieren
/ x' ]7 K( d3 r, B. K8252012
2 ?& F9 ^4 W& F2 R* u# zVehicle Design Automation: Close Range Visibilty -  maximum length for blind vo
8252262
Unsuppress of last feature takes too long
8252470
Curve Smooth does not work correctly
6 v: _. k% K1 s& Y+ `% L2 `0 z8252485
) [6 L0 \; t3 Y% w( S# iGlobal Shaping does not work all around and not correct
1 f9 y" \9 n' L+ M8252571
Baugruppe NX 7.5 kann nicht in NX 9.0 geladen werden
8252781
- S6 r6 ]! V7 R/ `3 t) E3 Q# vInterpart expressions are multiplied by 1000
8252795
Diameter Baseline Dimension not work for invisible  Centerlines
8252860
8 L( y- P9 T+ }& U0 ]9 jDeleting marking lines takes long time and ends with  error
3 `/ j( d& A1 q; R' e9 W  a8252994
Datum Coordinatesystem losses associatively when changing  from offset to dynamic
8253096
UF_UI_set_minimal_graphics_window() regression in  NX 9
. O$ G: f0 W0 R) z5 r- c$ z- W8253219
When edit a CAM Operation appears "Null tag not  allowed"
8253332
CAM: Paths unlocked manually are locked when part  is reopened
8253410
NX 10 MP - RR Issue 3616 - Results Probe with DR point  function gives wrong result
$ H1 R; s% _' F3 a2 i" N8253785
Reg_NX 9.0.2: internal errors (Parasolid ifail 934  from ENPBEN) with NX 9.0.3
8253791
' q0 Q" C- X2 p8 _* i  K/ N. {4 r'auto. coupling' constraint - opening .sim and switching  from .fem to .sim slow
8253806
Electrical Routing: NX crashes during renaming of  Multi Port
- {* L- p+ B5 d0 L+ V* \8253826
7 b" ]# U4 u3 T# HCAM Face_Mill_Manual Regions have Gouges - Wrong error  message
# b& _8 x5 G) ]4 t" r8253865
" F8 h4 L0 N, PPart Name Management, cannot change to Reference if  part contains drawing
8253960
* d: F5 q8 I4 GZero thread dimension after updating the view (lost  references)
8253977
4 \2 F' x# V$ z6 K' V- Z) V9 ]. |Switching between solutions slow if 'automatic coupling'  constraints defined...
8254175
Changing 'automatic coupling' constraint display affects  '.sim' file open time
8254277
RR Issue 3643 - Bug in Time Step Control - edited  values are not retained
8254350
: [. }: E6 ~+ v. |, l! }/ ACheck mate failure
8254369
* |% N( c3 d. K( GMultiCAD: Error when saving parts with references  to JT components (RC 580163)
8254534
WIR V2 Reattach Spline Removes Lock Length
8254611
  E* t* Q2 x" B0 {" z* KIntersection Curve is Out of Tolerance after modification  of an area that has
8254724
! V& o: @5 B4 V; H/ S. @2 E9 ?6 @Law Extension Deviation
, f1 n3 a6 i$ }4 L4 T7 L8254760
Can't create a detail view
8254798
- U: h- S! i- ]PDW toolbar workflow reorganization
8254861
" W/ c$ ]0 H) |# r# vReplace Feature of a Sew by a Trim and Extend Feature  doesn't work
8254867
& l" y/ n3 w) ?: b; ONot able to open partfile or make it the displayed  part in Assembly Context
8254877
6 l4 d  J& }6 {6 h/ UCAM Cavity_Mill Problem IPW and Holder Collisions  3
5 K: x) E* V3 `( I0 k8254940
) t: r# }7 ~8 w$ o. K  U4 B. {' pTool Axis Decimal Places Output Problem
8255022
- E: I5 a) ^! V9 U/ pFind in Navigator - Warning
8255041
Product Interfaces not visible in the target
5 b" }; z% Q4 `' R3 b! Z, M) m/ [4 D8255061
Reg_NX 9.0.3_D1 - Uable to pick PMI Centerline or  Center Mark to create Linear Dims
2 Z7 ^( D! g8 M6 h5 ?8255065
SAE Manikin Wizard input field looses control to feature  after reordering
: ^: B/ ?; Z' o% m- l* d8 z8255077
Error occurred when updating hidden line display
8255092
Cannot create stock offset fixture port
, U4 x4 }% O$ Z) Q4 E8255123
5 q( ~8 _( n% O0 }Using 'Stock offset Point' clears extension and back  extension
& t" m  E  F0 S, Q+ X7 K. D8255154
0 J0 ?0 s: Y9 Z+ x1 _, H! wRelations Browser does not show links of fully loaded  part
8255182
+ h- o! Z9 U& Z, `8 _2 RInconsistent display of new curve direction
8255193
Problem with dimensions associated to view dependent  centerlines
8255229
Missing alert about legacy product interfaces
8255235
/ q) i3 |5 Z/ Y( C4 S5 CInterpart Expression does not get updated after replacing  component
; h! ~0 f; X# d8 U! w8255256
$ Y2 A4 U! _# H, @7 rWeld Point Wizard Distance Tolerance setting
3 P5 R) G) v" L  X+ D8255270
Offset curve oif 50mm causes NX to hang
" n$ u% e: `9 \% k' ^/ q  t8255298
It has to be possible to disable the "Resistance  Spot" in Customer Defaults
  D! h' T* c( @$ ~4 f5 i8255301
$ ~- g* @2 Z% C7 S4 z' B. tNot possible to change associativ translated weldpoint  to fixed see PR1959880
8 {% ~) \" k0 W3 j( f( C% h+ _8255321
2 W' }0 q$ N6 ^! S/ B" r% MUDF loses color definition
3 I& v. `" r0 e6 \8 D& H8255329
Display will freeze after undefined actions of big  assemblies
8255338
Open a parasolid file leads to error
: w4 y6 s, d# l6 U8255360
Replace component breaks links
4 I0 {4 c1 w9 p& Q, Y1 ?8255368
Selecting node within group via "Nodes by Group"  fails for single node group
8255379
" S- f$ t$ U: P: l8 @$ DCall of a Builder in User Exit causes disorder in  Part Navigator
0 A/ f7 P6 j& R$ Q2 e8255385
: P: D4 T  j/ f% O% K9 w# fID Symbols do not show text in NX 9.0.3, was fine  in NX 7.5
8255409
; c! a) z  E+ x# d5 A& BUnable to replace links in part
1 i5 [1 T" C6 i8255420
; d" r- h3 _: }) e8 tIn NX 10.0.1 ip1 we are not getting the same PMI report  that we saw in NX 9.0.3
3 j% S+ F& E5 d5 C8 P  O* ^8255422
Alert Internal error during update of weld points
8255435
3 K3 u7 B" d, D1 m3 J4 C; lIncorrect Change Reason Status In the Synchronize  Links
) x% V$ T, k7 i6 S. T7 x8255496
, n. J) C2 `1 m% z7 e4 K' LLaw Extension should give an alert when the desired  miter cannot be created
8255528
7 R  @' S) R- f% U; `Link changes unexpected to pos. independent after  synchronize in displayed part
8255542
5 g7 f  E. [$ S2 l6 E" v* iSelecting comp (ANAV Dependency panel) is slow
1 D! ]  J# w; v" h, Z& j9 F  J8255549
Up to date part displayed as out of date
- h+ i: V  m" N. B8 U. e8255588
The Meshing of some solid body is not possible with  NX 10
8255670
4 _5 y* n- T1 O" m; gUseless points after reopening a file with a projected  point
) g; e0 X% G- o3 Q8256313
Pedestrian Protection - Wrong WAD curves
8256356
3 Q% W9 h9 z; Q' qRR Issue 3885 - Solver time heat transfer plugin -  function builder ignores cert
8256625
5 j% |* O1 |; S0 l5 `3 O( x  AUnable to open partfile -> internal error
9 d4 S+ A4 F4 y6 M* A/ c8256692
0 J* R1 k0 f. b, q/ u6 {Regression: Method "Import" of the interface  "UFPatt" creates the min-Max-Box
* S' Y4 N8 r" t9 N8256925
/ @4 _  W. ]% y4 IANAV: Error 11 while calling callback with reason  553
8257809
: c# y; o# z" yG17_19 issue
; _. U" m4 j& i" \8257928
Memory access violation in NX 10.0 using KF ODBC
0 h0 x1 b& V. H) e1 b8258457
$ z" [* P; @5 ^' Z# PTrim angle check is not associativ
. q* r6 x7 S( a" ~8258603
Spline Length Constraints cause poor performances  when editing a RSpline
3 w4 e; x: J& |7 J, @' I* j8259018
Sketch lose Midpoint Constrain
8259895
Exporting a Drawing with 2DExchange some dimensions  lose the referenced objects
2 v# V  L1 Z  \! V- e; G8260340
. I+ }' |9 Y2 d! k  T8 JAssign button for dataset name is missing
8262206
When using Mill Boundary by Points, the first point  gets lost
9 r! [& [; i& U8263130
# q0 f% G# o5 V, w; Z4 n, CBad Performance in NX 9 Spline Path with 15+ points
; r  F1 Q% G/ k. ?6 a8263681
$ T2 j  _$ }4 Q$ b# I1 i6 RNX Sheet Metal - bead over cutout
+ ?. H! U' \' I8263688
NX Sheet Metal - bead ending in cut out
8264427
4 l' ]+ j5 T, y( T" p6 k& f7 vThe original code set the base color to whole binder  body. Which is not consistent with fiat's requirement
( I  H9 {* I# g2 |) h+ {5 D$ l' p8266572
1 Q! @- U$ b2 ~/ v; @+ BNX: Report Shortest Path gives a wrong result causing  the collision path
* s+ e; f8 F  ^* w$ F0 K4 _& e8268022
1 _* Q( ?5 C7 J9 U% B* `+ v- pWave Link causes lost of Material Information
8268277
8 ^1 d: m$ z) _2 N2 y4 wReplace of Thicken not possible
8268280
PS27.01.209 - Feature Playback failed
8268321
* V0 m. T4 G* hPerformance problem of Divide Face
8268602
Feature Playback Error T0929
8268732
- Q/ `6 K+ p: d4 D9 kUpdate starts during load even if delay update is  active
8268751
) i+ r: ]- i9 l$ f; NSelection during Animation
8268851
Failure returning outline of body at cut level
8269065
  q0 {" ^; t# \When the interpart update is delayed, Motion doesn't  show obvious reflaction  of the "out of update" status
8269080
File-Print crashes NX on second print
8269298
In the Upper Roof Selection Wizard of the function  Head Impact the correct req
% @) D1 O" x. K8269311
Motion Envelop with Option Process in Backround  doesn't honor the start part
2 W0 E3 p3 Y$ [- L" A+ n7 ~8269531
PMI is not visible in View of converted JT
8269813
7 x- ~9 U' g3 V5 f; h0 w; f5 lDXF Radial Dimensions scaled on NX Import
8 w  r5 S5 ?; b+ B+ K) u3 g# @8270011
. ?$ H; x+ ?) qRouting Spline Path edit performance investigation  of user error on constraints
* x) Z; _8 V  m6 k( [  H8 o, i8270015
: i' |/ v/ s( c2 S) s! d6 P7 dError-code 904 reported during ugmanager_refile
8270093
# {  }$ N  ]  D5 Q$ O! Z, ACompany logo (custom symbol), is not translated to  DWG when part of title block
" ]# V2 }# P6 o6 [; v* R# E0 R8270418
/ E! F! V4 ^8 A2 c- o% rPS27.1.211 - Feature Playback Error Blend Corner
8270452
Electrode Design: Rename Components not possible any  more in NX 10
8270728
% O, v; U, _& l: B5 j! ?DIE Wave Link Datum Planes are not updated
8270858
4 j4 Q% C# e. T1 |& D, q1 xUnable to generate tool path -> Operation used  suspect geometry
9 i- a9 _( s$ T& t8 Q& {8270898
This problem was discovered in NX10.0.3 although it  can be reproduced in NX10.0 onwards. The Law Extension features created  in previous releases produced different geometry leading to downstream  feature failures.
8270909
Assign button for dataset name is missing
8271164
. p$ f  V  H. u  T/ q  W; t7 ?& {Attributes dialog contains 2 unusable input fields  for value+wert in German UI
8271203
TC_NX_TCNavigator_Column_Config does not display property  values in TC Navig
8271296
3 d1 }; j: H3 b6 kThe loading-plane should be created and displayed  not on layer 11 but on layer 1
8271652
" ]; |" O" U  U6 a' r- EBeam Section property calculation time too long -  IDEAS UNV solver environment
: K/ M  A- d1 n$ e8271884
In the selection wizard for the function Head Impact  only one component of a p
! ~) t$ _# f3 V; B. \8272338
Moving a stacked PMI fires a error message
9 [+ N" u9 X! o! B9 L8272398
3 X  u  T' N( ?5 Q7 gSlow perf. NX_PRODUCT_INTERFACE_FIXUP_OPTIONS=repair,  'Load interpart data'
8272436
' D, C7 u8 H8 j; }) mThe point "Corner of bumper" is created  at the wrong place in NX 10
  n% _2 P' u  a, b. h+ u8272568
Unexpected update on OK in General Relinker
8272627
5 o. b& w  w5 _4 TSystem response time not acceptable when cursor is  moved across geometry
8272746
( Z  i% q% S/ w. Q7 [5 d/ r! |Assign button for dataset name is missing
5 j. ], Q# Z) g% O8272755
  m# y; I9 L, f& T: qJournal generates an error when tracing a point in  articulation solution
8272907
Up to date expression changes to out of date after  source file load
8272915
& e5 z; b- t1 j3 ZAssigning interpart expression to object causes out  of date geometry
8272933
4 ~, e- s' I- E5 b  o% }+ P, |Fonts to use setting shows part as scope, but is session
7 n; |7 ^* a! D0 \' [: v8272942
Naming convention broken on replace of interface expression  with same name
1 R4 |3 T- R) Y3 R; F& M7 ?4 Z! M+ _- V  E8273131
7 n$ n. a+ F9 tCurrent Production NX 9 Harness Won't Open in NX 10
8273183
5 e: y5 R% m! n) I- _No Preview of Section Curve for a JT_Facet body in  View Section command
% }* X4 a7 n# h8273256
NX 10 Weldpoint-Labels are not displayed in 3D-Viewer
8273328
+ v; [$ G. ^! q% X; E. F1 x) SFTL - Current Production Smaragd NX 9 Harness Wont  Open IN NX 10
8273376
NX 9 Parts cannot be opened (invalid foreign Expression)
+ Q3 Q( c: l$ S- J3 O( c. ]3 S8273403
5 N: X# z; a  V, }6 R: k! GCannot create sim, afem component from .fem (empty  result)
# `. \  ^: Q$ E$ ~' u! v3 r/ r8273515
Geometry not shown, only Bounding Boxes (Background  Loading apparently )
# v: s. d# e( G2 K! t8273568
Definition of Draft Angle does not remain expression  setting
  c6 j2 v& ^+ a7 x* ]0 Z! {8273624
Internal Error when changing Reference Set (Pseudo-POPL  apparantly involved)
! r$ t; J/ P; l4 P# V# v8 F8273920
) x1 R! c5 p" o) m; ~. b& d: uEdge Patch Fail to patch up all loops depending on  patch order
5 _$ V6 P; J( ^2 x8273964
Export of multiple FRF in csv format using Save Graph  from a PLOT
$ L4 n, j4 s, D5 w9 G8274030
The 50mm in Y direction offset-line of the Bonnet  Side Reference Line with the
8274039
The geometry of the bonnet rear edge reference line  is not correct to be create
8274040
  X1 H0 Z; V9 F! s% hNX memory blowup when loading JT exact
2 e/ B# v! p3 Y8274351
7 t/ B' v$ b& j) X1 ?Drawing not loadable
+ k+ l: _- l; M# q8274360
Failure to open Linked Mirrored Part when source is  loaded
8274413
Reusable pocket the thread is not copied in the linked  body
# s$ I% q3 p' q1 a. w8274445
1 C- U. v6 m* X1 h0 ^8 H1 L( IShow exact on JT file causes memory overflow
' L' B8 I: ?! E, ?# l3 G8 C& `8274538
6 D& S6 e, B9 U5 A1 a0 ]. n& bNX Welding: Weld orientation vector is not updated  after geometry modification
8274555
Weld orientation vector is not updated after point  position modification
8274609
/ J  ~: h% h2 H$ F# TThe 82.5mm behind in x direction offset-line for the  bonnet leading edge refer
8274657
Part Cannot be opened in NX 10
8274695
, I. E0 y* x, R- z. \! zUGPART fails to open: Invalid file name
8274697
Rear Crash barriere RCAR(2004) is placed at wrong  height
8274725
2 W- `! N2 U2 p+ F/ ?! A! A; [PARAMs are duplicated when using a GROUP in a custom  cycle
' R. v; K2 L3 ]9 u" U, H8274892
% r6 h$ \) b# w1 U& j! o) vThe created Bonnet rear reference line with areal  data (SEW) under the Assess
% J! C) q+ Q" i5 w1 e( k8274937
Misbehaviour: Interpart Expressions in NX 10
8274966
% R. D( p8 K! z1 B' J6 uObject associativity  type is invalid with part cleanup and angular dimension
8275056
Moldwizard - Create Geometric Expression Link fails  with legacy UI
8 H- P2 o, H3 x' B- r; J8275095
; g5 J$ n  O: x" dNX 10 ExpressionCollection AskInterpartLhsName_AskInterpartRhsName  create objects
8275246
The Wrap around distance 2100(WAD2100) is not symmetric  with the class-A data
8275252
The 82.5mm offset-line of the Bonnet Rear Reference  Line with class-A data fro
/ S/ g2 H+ }5 [% g% W+ ?1 B. V2 t! |0 @8275282
6 L$ F* C# o- i5 }* k, m# h6 x$ _Issue with graphics in FEM Model
8275307
% {5 f* U  |  S1 n' F' D. `Internal Error after defining and changing workbenches
  z8 ?& U7 ~3 b8275328
/ x0 M2 d4 ]* a2 [! v7 ~0 y% TUpdate view rotates Label Arrow heads
3 ~- u; j1 l6 p, n. b- H8275335
( A$ W% _+ c- V% hUpdate view moves GDT symbol leader
8275396
The created upper bumper reference line is positioned  not correctly for the leg
" l8 x. i  p7 j2 J/ k8275519
7 w3 t2 u1 R2 \2 X% C) d- Y- w! ENX9 Drawing can't open in NX 10
- w7 E9 ?; r' E8275613
Failure to remove a component in NX 10.0.1.4
8275693
! o8 t# x" M& A5 nFailure to save an exact mirror part in NX 10.0.1.4
8275729
5 J2 x+ N/ y0 |9 IThe created Bonnet Side Reference Line under the Assessment  Program "Global"
/ N2 Y* \: Y: l5 I& O8275735
Make Current Feature und  active Feature Group are not linked in Part Modules
8276001
6 N" Q* S/ z2 U% W0 Y/ H8 P1 t# |( ^Editing a law extension takes very long
8276150
Drawing: lots of data in memory after moving a view  with crosshatches (Boundary
8276151
+ _! f" X$ p% r, Z4 |( c6 T  A4 ^4 ~Drawing: Bad performance moving a view with crosshatches  (boundary curves)
8276471
4 N  F- H, ]- K5 `Broken Expression Product Interfaces after open in  NX 10
1 c) d6 r2 [8 l- ~$ n$ f/ O( {& V0 K! N8276474
Show_Hide of udfs not correct
3 Y7 v2 c; O5 Y8276557
7 c" T3 `7 z& X  u- LNXOpen.Display.DecalBuilder.GetImagesInPart throws  "Object no longer exists"
8276596
, o- G; k% `8 L3 M; V3 I; D% HMirror Feature does not work on UDF
8276637
NXOpen.Display.DecalBuilder needs multiple Commit()  call for correct scaling
8276658
* B2 e/ v. |6 m/ p* u  j2 s  k  gAttribute Mapping with Tc LOV causing troubles
8276856
NX JT translator error 1250
8276928
Attributes of CSYS of a hole are not updated in the  mirror part
0 n7 m* t' Y1 Q3 P9 A3 [& ?$ Y3 Y, l# g8276980
DecalBuilder.SetImageFilename() does not replace image  from disk in NX 10
* g9 z" r7 m& _; j: f8277020
, s' W! {4 b0 I; u! `Sig11 when changing applications, PMI & Partial  Loading involved
- G6 w: p& R; e: u: D8277216
$ R4 Q; U; {5 ^! ?* l" Y/ ~( xError loading fem after replacing component
8277290
CAM: Sequential Drilling with Depth User Defined -  Full length only
0 q3 Y: `1 ?+ f, E, O8277447
Reg_NX100024 Wrong representation of smooth end gaps  in view
& I, y+ l3 v, j: y$ z8277456
The parametric tool (tangential drilling tool) is  not shown as solid
1 U/ h4 ^& S. z) }, j8 ~8277572
For Weld Point Wizard, if using the "reuse feature"  option, do not allow a type that is different then the one specified on  the dialog
; ]4 t0 e, S9 s8277573
9 x- U2 l4 ]5 x$ ]Add new toggle "Create Single Features"  so user has option if "Single Features"
8277573
/ r( F. ~7 h# @* ^$ ^/ pDaimler was promised an Enhancement to the Welding  Legacy Convert Utility (Converts NX 9.0 Resistance Spot welds to new NX  10.0 feature type) Add new toggle "Create Single Features" so  user has option if "Single Features" should be created by the  utility, or if features should be grouped by a master feature. PRs submitted  by QA team 7511633,7511911,7513067 and resolved in CP.
/ {$ b. K- p, e+ J6 t9 p/ Y. f+ d8277626
0 g- m/ \1 K# ?. m1) when creating reuse features in a different feature  group, the reused weld points are left in the original feature group
2)  a change was made to the signature of 2 NXopen functions in NX 10 that  may affect the stability of existing customer NXOpen functions
4 M4 O" Y; u( I; h1 ^& H5 F- e8277662
This is to fix customer relinker failure in managed  mode and one IE with view feature failure in case of part being closed
8277766
7 ?3 |; {8 l/ l9 t) E4 b( `7 fSelection of Measure causes NX to crash
8277850
3 w) K) r7 B$ W0 x0 d% ?" jAdaptively analysis 'steady stress (absolute) error'  with sol 401  can be wrong
8277857
/ P/ t; q6 |# T5 D2 HSpline have a Tangent parent. The dialog say there  is no parent
8277860
  N, ]$ }1 u) _3 ZNot able to open partfile in NX 10
8277861
PMI causes update error
8278015
The drag node command has the Cohesive Ratio option,  but is only for volume elements. Thus this option has been removed
8278070
TC_CAM: Parametric Tools are automatically deleted  by opening a CAM-Part
! |" Z% P, J3 k8 N1 t1 H6 y( ?. v  i8278106
The quality checks on 3D elements is not available  in the samcef environment
$ Y  m! k1 M$ @4 `9 R$ Q/ L3 M8278167
1 k; M2 o7 G  i; M2 S$ JWhen user create a hole feature in a part having assembly-component  structure then to infer target body it takes time. User make component  part as work part and then pick a hole point. Depending upon the hole  origin selection, hole will infer its target body. This inferring takes  long time when component part is make as work part however if component  part is make as displayed part then inferring target body operation is  completed in 10 to 12 seconds.
4 W) b* L; q. Z5 U4 P, E8278472
7 N, b5 B$ z0 Z7 `Adaptive meshing analysis is failing due to poor quality  elements...
$ c( K0 u' ^- L$ T1 S" r/ l8278491
Adaptive meshing analysis is failing due to incomplete  mesh...
1 C& h: o) h# _7 V8278649
A delete expression regression
PR8278774
+ b- v) h5 l6 S$ L5 j, K  HNX freezes when doing SCAO on the edge/face case
1 @' G1 `0 E: ?8279273
Creating field of postview of worst principal was  giving memory violation. This was not allowing user to provide with the  workflow
8279494
Creating field of postview of worst principal was  giving memory violation. This was not allowing user to provide with the  workflow
: S; T2 @# H; l$ j5 V2 N2 R8279526
/ f  v' S5 m# |. D" n6 fAttribute units are invalid (not known in this part)  when using template
8279655
Certain Simulation Models may go through a BC validation  during a Replace FEM operation. This happens before the new FEM has been  assigned to the Simulation, causing the validation to crash when a NULLPTR  is de-referenced.
% A. o: ?% d+ h( e$ {9 e, P8280603
! {! ^  o( N4 RWhen listing attributes to the listing window NX could  crash if one of the attribute values had a very long length
8280868
+ D4 ]) b4 M5 E0 _$ i4 p; mWhen creating non-associative weld points, if a point  is selected from part navigator, the resulting weld point will be associative  instead of non-associative
8281160
+ G8 Y) O$ v, [6 w  @! ^1) output weld points are not being projected if projection  option is on. the projection option will be hidden if associative option  is toggled on
& P! a0 C9 N0 Y7 g" j8281215
6 c" r! ^& K+ m+ _3 a: OIncorrect import of load scaling if vendor is MSC  Nastran in NX 10 and NX 11
1 w* ?4 n2 Q* m- l$ Z/ @8281361
Regression due to IPE/MFK conversion
8282134
" L- O* D8 v* E) bThe PDF converter is executed via command line. If  the converter software is not installed in the default location, the command  execution fails, but the user has no indication this is the reason why  no PDF file was produced
, n: Y0 p) a0 G6 R# \6 u8282425
, F& \6 g0 |. M7 _: `1 PAnnotations with extensions are hidden when view break  is applied
8500148
Failed to create transition in NX 9, NX 7.5 works  fine
: X$ d2 k. R4 t4 C8500180
( \, z! i3 Z/ ?5 G: l4 S$ SPR2242392 is not fixed on NX 10ip23 though CRR says  it is fixed on ip21
4 \  F" l( p5 k" M' C8500480
Unable to open a part with Internal error:memory access  violation
8500861
Note leader stub position and alignment differ some  cases
6 v: C4 w, j9 `8 s8501094
! d8 g3 H9 O+ p7 l# Q. g8 FNX crash while adding CSE variable "VC1'
8501620
Failed to create profile cutout in NX
8501665
UF_ATTR_set_user_attribute() returns error code 580014  in NX 10
8502510
NC path missing intermittently in flow cut reference  tool operation
1 i' |( h$ a, q8503090
4 D1 ^5 v* e4 z4 m/ l* T+ VSpline method is changed when editing a spline path  created by "By poles" method
2 I. I5 K7 T3 R7 m8504021
9 Q6 I' h; z& t$ L6 Y; {# ~/ ^Extra NC path generated on the areas not selected  as Cut Area
8504512
CGM file cannot be imported in NX 10
  o" Y5 j* o* h+ J8505783
CAM Face_Mill_Manual Regions have Gouges - Wrong error  message
) G* W  f0 k4 ?. a8505943
2 X: b3 b5 o- U1 BThe object changes to translucent after select it  in ONT
! X2 v* T; n6 V1 s* d9 N- H4 u8506062
Extreme Point Measurement feature is not localized  in PNT
8506772
Internal error occurs when running Create Region List  and Delete All three times
8 y+ _- ~  C0 D8 `7 {5 L8506844
7 n# K' G4 K$ A! ZWhile add component and loading in NX 10 takes more  time compared to earlier version
7 C( O( x# V" g! v8 k) k8507020
6 V. i8 _& o/ v( fGetParameterData() & Aspect() does not return  values
8 ~3 {# ~. e" O/ M8507142
When moving split body, the associative curves are  not updated well
% p6 p1 |- Q" `8 z# W7 q! J8508183
Grip primary message was not honoring 40 character  limit
. ~- i, ?7 B4 v) ]7 E8508685
/ x1 k9 y! l+ V/ r% ^& j8 A) K" w7 cExport to CSV, and the attribute of measurement in  Chinese is wrong
8508768
; _9 ?6 i  ?! P0 `ksc_5601 Teamcenter encoding was not mapped
- |9 r2 h) u2 E+ {% u9 h8509983
"work order" does not works in NX 10, NX  9 works fine
4 u* n% |- i9 j) ^8510246
TABNOT_cell can_update_with_unloaded_refs(..) was  overridden in NX 10 to return TRUE so that attributes on unloaded objects  and referenced by cells are evaluated. Parts List cells are evaluated  on master model close which triggers parts list update. During auto balloon  processing of Exact views, while determining whether reference balloon  is present on a component, call to Drawing
  b; e; @; f' e( B8702416
6 t3 }& y; D; ~2 ]  sUnable to export a tabular note to DWG
3 h) l  \3 P# @3 O( b% B
" C, f! i: J2 h, M1 Q

异乡人

升级后，自定义设置在进入任务草图后会消失，请问有解决办法吗